Menger Sponge - Easy to Print
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A 4th degree Menger Sponge that can easily be printed in 2 halves and then glued or held together with printed pins
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 16
- Wydruki
- 0
- Wyświetlenia
- 69
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Sculptures
- Licencja
- Creative Commons — Attribution — Share Alike
Files Include:
- Flat and standing on corner version of 1st-4th degree Menger Sponges
- 4 cut versions of the 4th degree Menger Sponge (for easier printing and to see the cool patterns)
- Locking pin that can connect 3rd and 4th degree pieces together
- Pin tool to help with the removal of the locking pins
Print Settings:
It is best to print the sponges diagonally, but this does require more support. I suggest you print the “half” version twice and either glue them together or use the pins to hold them together.
All of the “cut” versions don't need support so long as they are printed on the cut face.
Print the smaller sponges first to ensure your support settings are good before printing the full 4th degree sponge.
Bonus:
Print my Kinetic Cube Holder at 116% scale to display the full 4th degree sponge in a cool way!
Happy Printing!