DJI Focus Pro Top Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I needed a way to top mount my DJI Focus Pro so I created a small lightweight sleeve that friction fits over the unit.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 22
- Wydruki
- 0
- Wyświetlenia
- 236
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution — Noncommercial
I needed a way to top mount my DJI Focus Pro so I created a small lightweight sleeve that friction fits over the unit.
The design has two 5mm holes spaced 20mm apart on top to fit M3 threaded heat inserts. You can now mount the unit from the top on the provided rail mount that comes with the unit as picture or however else you want.
I tested a couple iterations of this part and printed it in ASA at 100%. If using ASA you might consider that your particular brand has a different shrink rate than mine. If you're using PLA or PETG or other materials, you might shrink it down to like 99.5% or something. It prints quickly with no supports so just print a couple iterations until you find the one that fits snugly.