45 Drives Storinator SATA to SAS Cable Clip
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a clip created for the 45 drives storinator to hold new SAS cables on the backplane.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 17
- Wydruki
- 0
- Wyświetlenia
- 338
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a model created for the 45 Drives storinator to hold SAS to sata connectors in the original backplane. Designed for the Storinator 30 and 45 to allow upgrade to faster cards where the cards used Mini-SASHD instead of mini-sas connectors.
This allows for the storinator to be upgraded for additional capacity replacing the original cables.
The breakout cable used was a 10GTek CAB-8643/48482-PWR-P1M and required 8 cables to completely replace a storinator 30 backplane where two cables would be spared inside of the unit.
This was printed in PETG solid without supports rotated to 90 degrees flat on bed with tabs perpendicular to bed.
Cable is inserted through the bottom then pushed through the top in order for the bottom clips to hold the drive connector from falling out of the bottom.