232 modeli
Attach the baseplate using simple 2-sided tape. The weight of the drives will keep it secure during normal use. Support: If you REALLY like this model and want to buy me a beer, you can find me here. Whether it’s feedback or just a nod of…
Overview OpenSCAD project to create a cage that fits in 3 5.25" drive bays and holds 4 3.5" hard drives using rails. Optionally supports a fan shroud to provide additional airflow to the drives. You need to print: 1 cage-cage.stl 8…
The TerraPi Xtreme DUO is an open Raspberry Pi NAS case, featuring two HDD 3.5" slots . A set of USB3 to SATA external power adapters are required to connect the drives to the Pi. You can buy those from your local market, to ensure that…
I wanted a holder for at least 12 USB drives with a few SD and MicroSD slots and it should be in a tall/vertical tower design. This holder has a small cavity for a 10g balancing weight (those lead weights with a self adhesive side for…
Driveshaft for 1/24 scale crawler axial SCX24 and Probably AX24. First pass so still a little rough but practical. Designed this so I could flip my motor/transmission around for more weight forward. Needed custom driveshaft lengths. I…
3D Printable Caddies that you can use to adapt the 3 ½" storage bays of a 45Drives Storinator (AV15, Q30, S45 or XL60) or 45Drives Homelab HL15 server to accommodate a standard 2 ½" 7mm SSD or 2 ½" 15mm SSD. You'll want to use these M3 x…
Inspired by a model at thingiverse (https://www.thingiverse.com/thing:3544454) But needed something to be laser cut. Designed to enclose the drives, which is why the ends are not symmetrical. You will (obviously) need two identical parts…
Inspired by the 2.5" version: https://www.printables.com/de/model/212758-25-inch-hddssd-caddy-for-multiple-drives I designed a similar one for 3.5" drives.
Isolation Bearing floats to keep Z axis supported but does not translate vibrations to motion path. You can watch and see the movement of the drive screw as the Z is travelled. Bearings cost about $1.05 ea Traxxas 5118 8x16x5mm…
Updated 5/17/2025 While I like the simplicity of printing without supports, one of my friends could not get used to angling the tee when putting it into the ground so it ends up straight once at the proper height. I added an updated model…
A simple remodel, I did not take my time, but I spaced it out a bit to support 5 3.5" drives instead of 4 like the original model. I have computers that use the IcyDock FatCage, which supports 5 3.5" drives. I found this model when…
Modified version of the original model that is now stackable
Modifying my computer for use as a server required installing more hard drives. The original case frame had space for only two drives. Thanks to these frames, multiple drives can be mounted. The assembly set includes one base and two…
2x1 size gridfinity bin with cutouts for M.2 drives up to size 2280. Height is 3 units
This is (I guess) my fourth take on this crucial part… This time I wanted to improve the clearance within the suspension assembly and improve working parameters (namely the maximum angles before it locks). I also wanted the sliding to…
I have had trouble with the original dogbones and joints binding on the Cramer RC Truggy when the suspension was extended and during sharp turns, resulting in cogging and snapped wheel joints / dogbones. This is a remix of the excellent…
This is a 3D Printable SSD mounting bracket that is compatible with 45Drives Storinator servers (except those which feature boot drive backplanes). This was shown off in Techno Tim's video here: This is compatible with the 45Drives HL15…
This is a open frame chassis for Raspberry Pi 4 with 2x 2.5" HDDs/SSDs. You can mount drives with a height of 15 mm. The holes in the Raspberry have a diameter of 2,7mm. Therefore i drilled them to 3mm. BOM: 4x 20mm M3 screw (pi mount) 4x…
This is a hot-swap drive cage, I designed it to hold 4x 2.5 inch drives, each up to 15mm thick. I made this for my old 2u server I emptied out, which doesn't have its own 5.25 slots. However, I sized it to fit in a 5.25 bay so it could be…
I used PETG for printing. No support required. The cage holds up to 8 SSD disc drives and will use only one mount place. It was developed for Lian Li A3, but might be used with other computer cases. To mount, I used M3 X 16mm hexagon…
Here's a purpose-designed bracket to interface with the spring-loaded optical drive pins to add hard drives with some cooling. The other designs were very restrictive and I didn't even try them for fear that the drives would overheat.…
reduced the size of the posts to 4 spaces
Here are all of the 3D Printed parts that come stock on the 45Drives HL15 server. If you need spares, or want to print your own, go to town. We recommend using PETG with at least 20% infill for these parts. PLA will likely soften at…
Designed in Solid Edge and printed on (somewhat modded) Ender 3 V2 with PrimaSelect PLA Pro filament (10-20% infill, but I usually print with 6+ outer walls because I really like sturdy prints).
This is designed to be a 1u enclosure for a Raspberry Pi 3/3B+/4 and two 2.5' HDD's or SSD's. For more info, please check out my blog post about this project .
The is the new driveshaft that will be used in my RC Car V2, five times ! It drives the wheels (that's 4) and is also used for the front transmission. The overall length is ca 60 mm and it is still a double universal telescopic joint.…
Remix to accept a 9mm drive. Category: Computer
Backups are important but if you're like me, they often get forgotten about. This enclosure lets you easily package 2 x 5tb drives to and a Raspberry Pi for file storage. For more info about this project, please have a look at my blog…
Print 2 uprights per drive. The center supports are optional but do help with stability. These were made specifically with the Seagate Backup+ Hub 8tb drives they sell at Costco all the time. They print support free in the orientation you…
After the V6, the V8 is here! Engine style desk organizer / phone holder for car enthusiast. You could scale is you want, if you print it in the original size it fill fits for most phones, like 14 Pro (with UAG case) in the pics. The…
Einfacher Ständer für externe USB Festplatten. Unten am Boden kann man kleine Plättchen aus Gummi oder Filz anbringen. Für eine maximale Festplattengröße von 110 mm Länge und 22mm Dicke. Versionen, für 4, 5 oder 6 Festplatten. Gedruckt…
Nobody uses optical disk drives anymore, put all your old 3.5" drives in the 5.25" bays. The slider is made as a clone of the one in the images. Print instructions Use the screws indicated on the pictures for attaching the extender pieces…
Took original 2x 2.5" drive design and made it for just one 2.5" drive. Also cut out about half of material used by modifying length and cut outs in bottom. Also redesigned clips so that supports are not needed. Only works with 7mm thick…
Holder for 2.5 SSD HDD storage. Fits 5 drives of 7mm and 9.5 mm thickness.
A replacement for mounting SSD drives in PC cases. It can hold up to 5 SSD drives. The design also includes holes for at
This is a remox for slightly longer drives, 182mm. Resized it to fit my Pioneer BD-R S08 Blu-Ray recorder.
I printed it in Nylon (Taulmann 645) and it works pretty well.
similar design to popular socket holders. I suggest printing the pegs in a brighter color of filament than the base. I painted mine but plan to reprint dual color soon I used 15% infill, 3 outer layers printed at .2 height on a prusa mini…
Usb holder for 30 pendrives, 12 sdcard and 10 microsd and a tray. Most of my drives were too wide to fit drives into both rows of USB slots. Added some extra space between the rows. USB slots come out to tight on my printer so I scale it…
case to transform your old 3.5" drives into an external USB drive
This enclosure works great for a NAS with no fan. Pi 4 runs in it all day long with no heat issues. Print instructions Print at .3mm with whatever infill you feel is necessary. Print box laying on Pi end. Print lid laying on smaller flat…
On the original basis, a 4010 fan is added to cool the CPU of the motherboard, and a 5015 fan (Voron model cooling fan) is used for driving heat dissipation. I designed an independent air duct above the drive, and the 5015 fan needs to be…
Please comment, rate, and post a make! I ran out of physical space to add more hard drives to my home server. Given that I already had a few parts laying around, I didn't want to spend several hundred dollars on a prebuilt enclosure. So,…
I needed a HDD/SSD holder to hold the max drives I could fill on the Prusa Mini print plate, so remixed this Fits 15mm drives
A trivial design - but it's pretty annoying if you don't have one of these. Should print just fine in almost any filament. A little dab of hot glue will hold it in place.
Changes I made it able to support a 10mm thick drive (instead of 7mm). I also added fillets and chamfers just to kind of polish it a bit. On my way toward doing a make of this nice design by Scott Gibb, I also created this remix. I used…
For all you Blackmagic camera people out there (you know who you are). I present, the holy grail. If you're anything like me, you have an unreasonable number of these little Samsung SSD's floating around to fuel your little BMPCC…
Stackable boxes/rack for WD elements external hard drive or similar drives. The stand holds everything at 15° angle for better airflow. Print with .3mm layer hight to save some time. Easy to permanently fix together with some glue.
Please comment, rate, and post a make! I ran out of physical space to add more hard drives to my home server. Given that I already had a few parts laying around, I didn't want to spend several hundred dollars on a prebuilt enclosure. So,…
This is a bracket for installing two 2.5" hard drives or solid state drives in to a single 3.5" hard drive bay. Optionally, it can be used to mount one 2.5" drive on top and a 60x60x10mm cooling fan below it. If you're only mounting one…
Hard drive stand for six 3.5" NORMAL drives. This version is 6x 26mm and can hold 6x NORMAL 3.5" HDD's. If you are looking for SLIM version (typically Seagate 500GB-2000GB) it's HERE PLA or PETG 0.2mm layer height 100% infill no supports
A quick and effective way to mount one hard drive on top of another, perfect for cases with a single HDD mounting slot. Compatible with Cooler Master's MasterBox NR200 and MasterBox NR200P as well as all Elite 501 and 301/2 Cooler Master…
Hard drive stand for six 3.5" SLIM drives. This version is instead 6x 26mm, 6x 21mm and can hold 6x SLIM 3.5" HDD's (typically Seagate 500GB-2000GB). If you are looking for NORMAL version (6x26mm) it's HERE PLA or PETG 0.2mm layer height…
The design is similar to that of FbeauKmi's Filamentalist F1 but adapted for the BoxTurtle. Print parts (for 1 respooler) ABS 2x Wheel.stl 2x Hub.stl Settings : 20-40% Infill TPU 95A 2x Tire.stl Settings : please activate Spiral Vase mode…
!!! PLEASE READ THE DESCRIPTION CAREFULLY BEFORE STARTING TO PRINT THIS PROJECT !!! This is a box for SD and MicroSD flash drives, modeled on an element of the Warzone game. The box consists of two parts connected by a piece of filament.…
Variant 150 mm (three modules) or 50 mm (one module).
I wanted to be able to stack three 3.5-inch external hard drives. So I created this simple ventilated rack. It fits three external hard drives. Each drive can have maximum external dimensions of 127mm x 38.1mm (5 inches x 1.5 inches),…
I designed a V6 engine style desk organizer / phone holder for car enthusiast. You could scale is you want, if you print it in the original size it fill fits for most phones, like 14 Pro (with UAG case) in the pics. The phone hole is 79mm…
A pendrive holder where you don't have to remove the cap from the pendive. This way you won't lose the cap :)
This is a two part component. It is a 2x 140mm shroud for the Jonsbo N5 to be mounted in front of the drive bay. The original wooden slotted cover will mount on the front of this component. I designed this component to fit my very…
This is my fifth take on this crucial part… It will be used on the front axle of my new RC car project - Peugeot 3008 RC. This time I wanted to reduce the size as much as possible while still using no screws and keeping the ability to…
A compact and practical storage holder designed for 2.5" HDD and SSD drives . The holder can store up to 10 drives and is compatible with both 7 mm and 9.5 mm thick disks , without any adapters or modifications. Each slot is shaped to…
A simple and easy to print model! Stores 15 usb drives.
My desk was cluttered with hard drives, the Blu-ray burner, their cables and other smartphones. So I designed these elegant boxes to put things in order. The boxes are of two types: for 4 hard drive or smartphone slots, for a Burner or…
5-Drive 3.5" HDD Cage (3x 5.25" Bay) This is a high-density, parametric OpenSCAD model designed to fit 5x 3.5" HDDs into a standard 3x 5.25" drive bay stack. This design is an evolution of the proven 4-drive cage by AnthonyZ71, optimized…
Not locking. Does not fit 3.5-inch drives. Requires 4 M3x5 countersink screws to mount.
See the original, I just slightly modified it. These things are great because you don't have to find&buy crazy adapters for 3.5" caddies, like those for Super-Micro, or any which only have side-walls and not a base-plate on which to fix a…
Driveshaft Grinding Jig for the Wet Biscuit Upgrade Pack 2 P.S. Use two M3x6 screws to hold the brass rod in place
Simple HDD Tray for 8 Drives without wasted filament. I made it for 0.5 - 0.8er nozzle sizes, but you can print it with smaller ones too. Inner sizes are 120,1mm x 26,1mm. Thats the specs for 3.5" Drives. If your printer does not print…
This model holds five USB devices to put near your desk or anywhere. It accepts lower profile USB flash drives, wireless USB dongles, and others. It features rounded edges and no supports or brim are required.
1-4 Washers.3mf contains full set of metric and SAE washers for smaller shaft twist nuts for ¼" drive sockets. 3-8 Washers.3mf contains full set of metric and SAE washers for larger shaft twist nuts for 3/8" and ½" sockets plus there are…
The hinges require standard supports (no tree supports). Ensure no supports are placed inside the hinges. Typically, you can use the “supports only from build plate” setting or a "support blocker" in most common slicers. Standard supports…
This print allows for up to 12 2.5" disks (up to 9.5mm per disk) to be mounted in a full-height 5.25" bay (common CDROM drives are half of that height). Best printed With no top/bottom surfaces and 10% honey-comb infill. Side and top…
This is just a quick mod on the amazing work done by @CADGuy, so it can used to store flash drives.
Prints Not all the models are printabel without support. /!\ the “Botom housing” need support for the cable hooks. Activate standard support interfacing with only the build plate. Use your print profiles for best result. /!\ the “Botom…
A better SSD holder for 45Drives chassis that allows for airflow. Needs threaded heat inserts like https://www.mcmaster.com/93365A132/ and matching screws. When mounting, make sure the arrows point toward the middle.
This is an easy to print version of the driveshaft from the Thermomix WunderJuicer, to replace it in case it broke. A M5x20 BHCS is used to attach the parts together. There is a modifyer body included to increase perimeters and infill for…
This is an adapter so you can put your 2.5" drives into 3.5" bays.
designed to hold 4 SSD drives inside a computer case
Thanks to this adapter plate that replaces the original optical and disk bay for the HP ProDesk 600 G3 you can mount up to 6 disks while still being able to mount the top enclosure of the PC. The model for the disk bay is: 3 Slot 2.5" HD…
Box for flash drives, opening on two sides. Lid without spontaneous opening.
Update for 4.1: slightly smaller eff. diameter for less friction Update for 4.2: further reduced eff. diameter for better engagement & slightly higher connecting joint for the rim
This desk organizer has specific slots for pens/pencils, micro SD cards, SD cards, and USB cards. It has a deep space for extra pens, pencils, markers, or other long tools. It has a smaller space for miscellaneous things such as…
Extended the design from 2 slots to 4 slots with the same dimensions used in the original design. For more details and the rest of the files, visit the original model page:…
This is something I designed from scratch to use in a Sliger CX2177a case I used to build a server. This will allow you to mount a set of three 2.5" drives up to 15mm thick attached to the front fans on the case. If you are using an ATX…
This is a simple desktop organizer to store various USB sticks, SD cards, compact flash cards, etc. Print in PLA, no supports, no brim needed. Easy print. I hated having a drawer full of loose flash drives and cards, so designed this…
This will allow you to mount a 120 mm fan above your PCI slots for extra cooling. I use a 2mm bolt to attach the bracket to the case as that is about the size of the slots on the case. The bracket will accommodated a fastener that is up…
Dual MyBook RetoNAS
I needed to stack 4x SSD's for my recent server upgrade Category: Computer
I used the PCB from this hard drive enclosure: https://www.amazon.es/gp/product/B081N1NM18/ref=ppx_yo_dt_b_asin_title_o01_s00?ie=UTF8&psc=1 Print Settings Printer: uwu Rafts: Yes Supports: Yes Resolution: 0.2 Infill: 10 Filament: Whatever…
Update 2026-01-20: I added an option for using a SATA to USB adapter and not on how to make it fully USB-C if your Mac Mini has the ports (I have an older version that doesn't). Update 2025-12-26: I added a "blank slate" version of this…
Module for use in my Lab Rax 10" home network rack. The original I have remixed didn't quite work for my setup, so I took a stab at correcting the issues. Now it lets me fit my 4 x 2.5" 15 mm drives, and it extends a bit less in depth…
This is a storage system for 100 ¼" bits. The storage system is perfect for organizing any loose bits cluttered around, or just to have all the bits in one place. Print Instructions: Make sure to print with the bottom facing down for best…
This is a very simple remix of the front piece of Haydn Baos ITX NAS case called MASS. It removes the 2.5" drive bays to increase space inside the case and decrease print time. It also changes the positions of the zip tie anchors to a…
Great original design by npopson but I needed to fit 8 drives in my array
Reworked 45Drives drive caddy for 9mm SSD drives. Also widened the screwdriver channel for wider shaft screwdrivers.
Holder for two 2.5" external HDD. Desk or wall mount.
This cap covers the M20 stub of the propshaft to protect it from salt during the winter. It is made for my 2004 Opel Corsa C, but should fit a lot of other Opel or Vauxhall vehicles with 5x110 wheel hubs. It should hold onto the M20…
I got tired of plugging in a USB drive and waiting to see what's on it only to find that it's not what I'm looking for. Floppy diskettes had labels; so, why shouldn't USB drives have labels? Since a stick on label wasn't practical, and…
I created a series of small boxes for holding stuff inside my toolcase I use as an event technician. This box contains up to eight USB drives for different applications. I used these USB drives. These boxes fit the inlay of my Peli 1560…
