1 / 3
2.5" SSD/HDD to 3.5" HDD mount adapter - 7mm thick drives
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Took original 2x 2.5" drive design and made it for just one 2.5" drive. Also cut out about half of material used by…
- Ocena
- 5 / 5
- Polubienia
- 25
- Pobrania
- 204
- Wydruki
- 2
- Wyświetlenia
- 964
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 2) (Komentarze: 2)Remiksy (0)Kolekcje (30)Powiązane
Took original 2x 2.5" drive design and made it for just one 2.5" drive. Also cut out about half of material used by modifying length and cut outs in bottom. Also redesigned clips so that supports are not needed.
Only works with 7mm thick drives.
Print Settings
Printer:
JGAurora A5
Rafts:
No
Supports:
No
Resolution:
.3
Infill:
20%
Filament:
3D Printing Canada PLASilver
Category: Computer
