Anycubic Kobra S1 Low Profile Top Lid Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Kobra S1 Low Profile Top Lid Holder for printing low temp materials like PLA - 20mm Version
- Ocena
- 5 / 5
- Polubienia
- 85
- Pobrania
- 600
- Wydruki
- 4
- Wyświetlenia
- 2846
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Anycubic Parts & Upgrades
- Licencja
- Creative Commons — Attribution
Kobra S1 top lid holder for use with filaments such as PLA where you need to let the heat escape - this allows for a lid opening of around 20mm and will work with most ACE Pro risers.
Print in place hinges for a quick easy print. To install, simply remove the two screws holder the handle on, insert the existing handle in the new printed holder, and screw the original handle back in place. I printed with PLA using 0.2mm layer height. No supports or brim needed.
The .stl and .step file is also included.
Note: It appears there are different lids out there. If your lid has splines on the bottom then this version will work.