Skadis B6Neo
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simple SKÅDIS mount for skyRC B6Neo charger.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 25
- Wydruki
- 0
- Wyświetlenia
- 148
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution
Simple mounting solution on an Ikea SKÅDIS pegboard for SkyRC B6Neo neo (non AC) smart balance charger. Exposes all ports reasonably well (you might find problems with thicker and bulkier ballance leads and USB-C connectors).
I recommend increasing the infill for pins, otherwise can be printed with lower infill.
Surprisingly, the charger's temperature dropped, which is a nice addition, especially with my slightly underperforming Noctua mod.
Based on: https://www.printables.com/model/921754-skyrc-b6-neo-lipo-charger which made modelling a breeze and the fit perfect
also available on onshape: https://cad.onshape.com/documents/67771501a1bd429701347650/w/f6a8e731d846a79bb9075ae4/e/d863779b97ab9b5728577ee8?renderMode=0&uiState=68bff28f0300d7592c112577
Warning:
I'm not going to lecture you about charging safety, but I'm going to encourage you to think about possible dangers of charging batteries, spatially lithium, possibly unattended on a flammable surface.
I'm not responsible for any damages caused by use of this model.