Audi Wheel Center Caps (60 mm, scalable)

Audi Wheel Center Caps (60 mm, scalable)

I designed wheel center caps for Audi rims. By default, the outer diameter is 60 mm with an inner diameter of about 56.5 mm. If you need a different size, simply scale the model in the XY-plane.

Feel free to leave your feedback or requests in the comments section. If you need a different version (e.g., with another radius or slightly modified dimensions), let me know - I'll be happy to upload additional variants.

Design

The caps are two-part:

• Main cap with Audi logo
• Optional inlay for the background (can be printed in a different color for contrast)

Two styles are included:

• Flat version
• Chamfer version (with beveled edges for a smoother look)

Print settings

• Material: PETG or ABS (recommended for heat resistance)
  → I printed mine in PETG
• Layer height: 0.2 mm
• Perimeters (walls): 5
• Top / Bottom layers: 5 each
• Infill: 15% is enough
• Orientation: print the logo facing down for best finish, inlay separately
• Support: not needed

Assembly

1. Print the main cap (flat or chamfer version).
2. Optionally print the inlay in a contrasting color.
3. Depending on your printer’s tolerances, you might need to scale the inlay slightly up or down so it fits perfectly.
4. Clip or/and glue the inlay into the back of the cap.
5. Press the cap into your wheel hub – done!

Notes

• These models are intended for personal use (e.g., replacement parts for your own car).
• Make sure to use a heat-resistant filament, as car wheels can get quite hot in summer.