1 / 4
IKEA SAMLA Print-in-Place Latch & Hinge (5/11/22L & 45/65L) — zdjęcie 1
1 / 4

IKEA SAMLA Print-in-Place Latch & Hinge (5/11/22L & 45/65L)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Print-in-place latch that doubles as a hinge. Easy open/close, keeps stackability intact.

Ocena
5 / 5
Polubienia
6
Pobrania
66
Wydruki
1
Wyświetlenia
281
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

A print-in-place latch designed for IKEA SAMLA boxes (5/11/22L & 45/65L). It clips onto the reinforcement ribs along the box edge and improves on other models by also acting as a hinge.

  • Works both as a latch and hinge
  • Easier opening & closing
  • Maintains full stackability
  • Strong print-in-place design
  • Works great with or without thin gaskets (drybox)

Perfect for organizing, securing, and stacking your SAMLA boxes without compromises.

All you need to do is to cut the supports and then its ready to use. If still stuck use some pliers to break the residual supports or whatever semi fused material between the two bodies are left.

Attention, the supports in the hinge are thin (0,4mm) so Its highly recommendable to use the “arachne” wall generator

Tagi