1 / 2
Sony A6700 hot shoe cover and eye-piece holder — zdjęcie 1
1 / 2

Sony A6700 hot shoe cover and eye-piece holder

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A small keychain holder to store your hot shoe cover and eyepiece of your Sony A6700

Ocena
0 / 5
Polubienia
5
Pobrania
37
Wydruki
0
Wyświetlenia
262
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Photo & Video
Licencja
Creative Commons — Attribution

Sony in all it's infinite wisdom made it so you can't clip a Rode (or other) recording device to the hot shoe unless you remove the eyepiece cover. Really a genius move. This means that not only can you now lose your hot shoe cover… you can also lose your eyepiece cover :D

Well no longer!! With this handy dandy keychain holder you can keep them save while freeing up your hotshoe!

!!!IMPORTANT!!!
The hot shoe holder is really tight in the tolerances. This is by design. Don't want to have it fall out randomly after all. This does mean there's a 99% chance you'll have to sand that part of the holder down a little bit to get it in. DON'T force it. Trust me… it's no fun trying to get it out. Sand and file and carefully test. It is adviced to leave it sticking out like a mill to more easily get it out later.

Print instruction
Print with the hot shoe cover plate bit towards the printbed. Tree supports can be used for the keyring holder. The rest should print fine supportless.

If you print this for a different camera and it works please let me know so I can add this information.

Compatible with:
Sony A6700

Not compatible with:
Sony A7ii

Tagi