Liczymy pasujące modele…
Mount your Kodak Charmera on a hotshoe. Access the USB-C port on both versions while the Case only version also has SD slot access. Supports optional, but recommended for the best finish around the button access.
Uses the existing screws on the camera. Included a dual hot shoe adapter to use a viewfinder and light meter.
I've designed hotshoe covers before, but none I was super happy with because they had to print vertically. This one is designed to print with the top side down, so it's a lot faster and easier to produce, and you can get a textured bed…
Now that I have a hotshoe cover design I like, I realized I never shared the design I made for the Ricoh GX200... So I updated it based on the new design, and here it is. It should print fine with the top side down, no supports at a 0.2mm…
Hi it's my first design so please be gentle. I needed an ssd mount for my lumix camera, camera world being expensive I've searched for a simple nvme usb-c adapter (i used this one:…
Hot shoe mount for G6 Thumb Camera Prints without any support
My old Slick tripod broke (see pics) so decide to create a small adapter to fit between the tripod and hot shoe / cold shoe mount. Hotshoe clamp: https://www.amazon.com/gp/product/B00K17THY2 Category: Camera
Das Modell wurde ursprünglich erstellt um den Sender einer HDMI-Funk-Übertragungseinheit mittels Karabiner an der Kleidung bzw. Ausrüstung eines Drohnenpiloten zu befestigen
Update 2024/01/09: Changed base to better fit cameras Update 2025/01/04: Changed base to make supports easier to remove Info about the one in photo: Material - PETG Printer - Creality Ender 3 V3 KE Supports - Yes for base, no for rest…
what you need m4 screw and bolt a stick (i used bamboo) of 12-14mm diameter print settings i printed it at 0.20 millimeters layer haight at 35% infill
Remix um eine LED Fotoleuchte an ein 8 mm Aluminium Rohr zu schrauben. Thanks to Walter! Category: Camera
Snoo camera adapter for a generic 18mm x 1.5mm hotshoe mount. Works with any cameras that has a standard ¼" camera thread. Printed with PLA and supports. Supports are a little tough to remove but necessary to ensure tolerances. Hotshoe…
I designed a hotshoe adapter for my Neewer NW-35 Pro Microphone Stand so that I could store my Zoom H1N recorder on the microphone arm. In addition to this model a 11-12mm M3 bolt is used to hold the hotshoe adapter in place. This is a…
This is a adapter to mount a standard Gopromount to your camera hotshoe. I designed to be printed in the most stable orientation. For the threads I used a standard M4 nut. To print it as intended, use the pictures as reference. On my…
Hotshoe cover with Fuji X logo. Measured and tested on my X-T20, but should fit practically any hotshoe on any camera.
A adapter from a camera hotshoe (ISO 518-2006) to a 1/4" screw hole, a screw should self-tap into the hole with ease. the hole is ~8 mm tall this design is open to modification on OnShape:…
Modified to print on the left or right side to add strength as suggested by @orthodes
Protects the Hotshoe on your camera of dust, dirt and so on. Keeps the contacts clean. It is printed on a Bambu Lab P1S but should be printable on nearly every 3D printer. It is a real quick print und uses only a few grams of filament.…
Initially designed this chair for use on camera hotshoe, though it also fits well as a pilot chair. Main features: Chair can be collapsed to very compact size for storage Back area has 3mm mount sockets to attach compatible action figure…
I don't like wasting plastic and now its less printing if hotshoe breaks + you can increase or decrease its size a bit. Fits m3 screws with 5.5mm wide cap, heat insert hole is 4.4mm wide and 5.8mm deep.
Flash stand for the older Sony hotshoe like the one on the A100...A55, A77. Print Settings Printer: Prusa i3 Rafts: No Supports: No Resolution: 0.2 Infill: 40 Category: Hobby
This is a simple yet sturdy 3D-printed holder designed to attach a tubular flashlight directly to your camera via the standard hotshoe mount. It allows you to securely position a compact flashlight on top of your camera, making it ideal…
Hotshoe cover designed for Canon 90D and any other hotshoe mount too. 90D will accept both of the designs but if you want to use it for another mount I will suggest to go for the one without crown. (These STL files dont have this logo its…
This remix simply takes out a lump from the cover so that it doesn't cause the camera to think there's a flash installed
Hotshoe cover for a Panasonic camera with auxiliary port. Built it for my GX1, but should work on many others. Print Settings Printer Brand: Prusa Printer: i3 MK2.5 Rafts: No Supports: No Resolution: .3 Infill: NA Filament: Generic PLA+…
Mount that allows you to mount hotshoe accesories (eq. light) in front of the phone on Quad Lock Tripod Adaptor.
Made to cover the ZV-E10's top mic array so dust/debris don't get in during normal photography-only use.
These are cones with the same opening-angle as the corresponding lenses would have on 24x36mm film. So in theory, if you can see something through these, it should be in frame, not withstanding parallax error, warped prints or crooked…
Mount your Kodak Charmera on a hotshoe. Access the USB-C port on both versions while the Case only version also has SD slot access. Supports optional, but recommended for the best finish around the button access.
This is the hotshoe for the EPL Olympus. 100% infill 0.08 layerhigh normal suport
Uses the existing screws on the camera. Included a dual hot shoe adapter to use a viewfinder and light meter.
Protection cover for Canon Speedlite series' hotshoe Successfully tested on: Canon Speedlite 430EX III-RT Canon Speedlite 470EX-AI Canon Speedlite 600EX II-RT
I've designed hotshoe covers before, but none I was super happy with because they had to print vertically. This one is designed to print with the top side down, so it's a lot faster and easier to produce, and you can get a textured bed…
Now that I have a hotshoe cover design I like, I realized I never shared the design I made for the Ricoh GX200... So I updated it based on the new design, and here it is. It should print fine with the top side down, no supports at a 0.2mm…
Hi it's my first design so please be gentle. I needed an ssd mount for my lumix camera, camera world being expensive I've searched for a simple nvme usb-c adapter (i used this one:…
Hot shoe mount for G6 Thumb Camera Prints without any support
This is a protective hot shoe cover that fits Canon EOS R/RF new hotshoe and standard DSLR hot shoes , helping to protect the pins from rain or dust . Files Included R50 – fits Multi Interface hot shoe (like R8 R50 and newer models. R100…
Redukce z jednoho hotshoe na dva, hodí se pokud nechcete kameru s klecí a rozšířeným příslušenstvím ale jenom upevnit na tělo kamery..příjmač a jeden mikrofon doporučený materiál: PETG bez podpěr, tisk in-place
A simple hot-shoe stand. The original stand that came with my flash broke, so I designed this beefier version. It includes two options: one is designed for brass heat-set inserts, and another features modeled screw threads for standard…
Original SVG included, as well as Fusion360 files. OM Systems logo can be added to PrusSlicer Part Gallery for easy addition to any print. Hotshoe is a remix of my Panasonic hotshoe, EM1.1 has accessory port that needs covering as well.
Printed in PETG at 0.25 with support enforcers on hotshoe overhang
Like any photographer or videographer looking for a way to mount their new Osmo Nano for a better POV, I created this hotshoe adapter for the Dji Osmo Hat Clip that came in the box with the DJI Osmo Nano. Thanks to the hat clip, you can…
Print in TPU. prevents the dreaded "Not compatable" notifications.
The model is made from 4 parts. The thumbscrew should be screwed onto the middle part with the raised flange facing towards the foot. The foot, middle and dovetail should then be carefully glued together. The model include location tags…
A simple adapter that allows an accessory wanting to mount via hotshoe to be tripod mounted. The main hole is threaded for standard ¼ x 20 tripod threads. The side lock uses any M3 bolt. I printed in PETG for strength at .2 layer height…
This is the hotshoe cover I made for my Sony a7C. I printed it with PLA
Rain cover for light rain - I like to do timelapses and I don't like getting my cameras wet even tho they are weather sealed, I just prefer keeping them dry if possible short variant doesn't really protect the lens unless you use some…
A simple hot shoe cover. Designed for the Canon EOS RP, but should fit other cameras as well. Print settings Nozzle: 0.4 mm Layer height: 0.15mm ~ 0.10mm Some areas require support.
i redesign it to fit my need -add another wing to the knob -change hotshoe -remove holder assamby Category: Camera
better than velcro superior than ductape it's a proper mounting for bluetooth remote Print Settings Printer Brand: FlashForge Printer: Creator Pro Rafts: Doesn't Matter Supports: No Resolution: 0.2 Infill: 30 Category: Camera
A 90 degree hotshoe adapter used to mount a Gopro horizontally on a medium format camera. Can be used for other things as well. Might have to tweak layer height to get it to print right. Make sure to print it laying down on its side.…
I need a hotshoe base so I can put my mic on top of my phone rig, so I print one :) Print Settings Printer Brand: Prusa Printer: Prusa Mk2 Rafts: Doesn't Matter Supports: No Category: Camera
Part to adapt 5/8"27 Threads to a HotShoe Mount Made this part to be able to use my portable flash with a microphone boomstand. Converts the 5/8" thread of the mic stand to a hotshoe, very simple. Help me out Using the affiliate Link…
Adapter to use a Microphone Boomstand for Camera Flashes Very Simple print allows you to mount a Camera Flash on a Mic Boom arm. Those can easily support the weight of those small Flashes, so if you already have a Mic Boom you can easily…
I made this to fit a 18650cell on top of my camera to power arduino driven triggers. I use a hotshoe splitter to mount both my arduino projects and this battery. Assembly is easy! Just screw it together like you see in assembly.jpeg…
I have created this thing since I sometimes take video and make photo's at the same time. The hotshoe place is taken by the flasher and i had no way to attach my Rode Microphone. I created this thing to clamp around the ring of a Canon…
I adjusted it for the camcorder. So I redesigned the hotshoe and added a little more space for the Wirelesss GO II. Thank him for his work! Upravil jsem to pro videokameru. Takže jsem předělal hotshoe a přidal trochu více místa pro…
Hotshoe adapter that bolts into the base plate of the modular mini tripod. The photo and the model is different because I figured after printing that the sides are not really needed. I cut it from the model to save printing time and…
I used some heat shrink tube to fix my LED because I can't trust my LED double sided tape Category: Camera
I've printed and used many different diffuser designs for the Yonguo YN24-EX and the Canon MT24/26-EX. The biggest problem with these are they often leave very little room, are too close to the subject or are designed to fit on flexible…
Small adapters are lifesavers, anytime. This adapter screws onto a ¼ inch camera mount and converts it to a hotshoe. So now you can attach all your hotshoe accessories to any camera mountable tripod or stand. I needed to mount a LED light…
Simple hotshoe. Holds firmly but can be easily removed. Mostly modeled on the Sigma SD10, but it should be universal.
It's designed for a 67mm cap, since I don't have another lens, so I haven't tried other designs, but remixing remains enabled, so you can edit it if you like.
Hensel Strobe Wizard Plus - Transmitter Code 3950 Here is a model you can tune for your printer https://www.tinkercad.com/things/a1n42C6ry91-amazing-maimu/edit?sharecode=AXmIrO8mA7LZq74R9AZd-c44Uvml0MjYPFqXZabd1Cs Hint: adjust sizes,…
I needed a stand for my new Aputure light Print instructions Category: Camera Print Settings Printer Brand: Prusa Printer: i3 MK2.5 Rafts: No Supports: No Resolution: .2 Infill: 10% Filament: Popbit Tough PLA Red
A little adapter to convert the standar hotshoe mount (Canon, Nikon, etc) to a standar tripod 1/4 screw for cameras. V2 has a stronger structure Category: Camera
An shockmount (isolator) for the ZOOM H2n. This design uses a silicone band (wristband) to hold and isolate the H2n. The silicon band should last longer than an ordinary rubber band. It should also be easier to put the H2n in the…
Mount your monitor and microphone on a Gopro rod mount (for example on your gimbal)
I found the provided hot shoe mod to be too loose for my comfort, so I designed this hot shoe to hold my 50mm finder more securely.
I shoot with various film cameras, and alot of the times these cameras no longer have working accurate lightmeters, so I ended up buying a ZB-M08 lightmeter from AliExpress (https://www.aliexpress.com/item/1005001349886750.html). I found…
Adapter to mount Rode VideMic Me to a hotshoe or coldshoe on a DSLR
Mount a Gopro to your camera. With screwhole for Gorpo screws. Compatible with all gopro mountable actioncameras.
A simple DSLR hotshoe to 20mm Picatinny rail for mounting a red dot finder to the top of your camera Print Settings Printer Brand: Zortrax Printer: M200 Rafts: Yes Supports: Yes Resolution: 0.14 Infill: 80% Filament: Fillamenum HIPs Black…
This is a simple, yet practical mount to fix remote triggers to a Hasselblad 500x or 503x Body. It can be put onto and removed from the camera very quickly and is sturdy enough to hold bulky studio-grade remote triggers. Print in 0.15 and…
Need to attach a microphone to your DSLR but don't want to pay for a mount? Why not print one? Printed in two pieces and held together with a bolt/thumbscrew and washer, this holder fits nice and snug in your camera's hotshoe. It's…
Two variations: a separate version to attach to an “M3 insert” of the honeycomb wall an integrated version, for a horizontal mount
Simple hotshoe covers remixed from metalsepp for film cameras to remember what type of film stock is loaded: Colour (RGB), or Black and White (BW) Also included blank STL if you just want a basic cover and CAD file for your own customizing.
Remix of https://www.thingiverse.com/thing:1460181 Mount part changed. It has hotshoe for mounting a flash or a hotshoe adapter. Added a knot from https://www.thingiverse.com/thing:641854 Post-Printing Nuts and bolts: 2x self-locking nuts…
3D MODEL DESCRIPTION design this to mount any sport cam with a 1/4 screw on the hotshoe of my panasonic Camera (work with GH4 and G80 If you try tell me I would be pleased), work well with insta360 X3 (and other). should work with other…
Well, I dropped my speedlite, now what? AH RIGHT I HAVE A 3D PRINTER! Modeled after the actual piece. 1/1 scale.
I wanted a place to mount my Ulanzi V49 and since I don't use it for direct light I decided that it would be easier to just mount it on my Vijim arm. It prints easily and has a nice tolerance. It also snaps easily and firmly to the arm. I…
Arca-Swiss mounting plate for Tentaclesync Track E with integrated hotshoe mount for mounting microphone. Makes for a very quick and simple field mic setup. I use a Rode Videomic Go II. Mic rail is standard hotshoe so should fit almost…
A simple adapter can install the red dot sight (from my telescope) on the hot shoe of the camera. The size of each person's red dot sight may be different, so please first measure the connector width of your red dot sight and compare it…
Parametric Hotshoe Mount Flash Diverter Mounts to hotshoe Provides reflector to divert flash against ceiling for softer lighting (no red eyes) Either use as pure reflector (with aluminium foil) Or use as partial reflector, partial…
Canon hotshoe - Action camera mount (GoPro, Insta360,...)
This hotshoe cover is designed to protect the small pins on your camera's flash mount from dirt and potential damage. It is a quick (less than 5 minute) print without the need for supports or post processing. Printing Instructions 1x wall…
Meet "ShoeBuddy," the suave connector on the block, ready to tie the knot between your cold shoe and any rig or gadget with a 1/4-inch hole. Crafted with precision (and a dash of flair), ShoeBuddy is the perfect matchmaker for your…
