1 / 2

5/8" to HotShoe Adapter

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Sven

@SvenS

Part to adapt 5/8"27 Threads to a HotShoe Mount Made this part to be able to use my portable flash with a microphone…

Ocena: 0 / 5
Polubienia: 5
Pobrania: 101
Wydruki: 0
Wyświetlenia: 345
Oceny: 0

Aktualizacja u źródła: 2 maj 2022

Informacje o modelu

Źródło: Printables
Kategoria: Photo & Video
Licencja: Creative Commons — Attribution — Noncommercial — NoDerivatives

Szczegóły Pliki (1)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (9)

Part to adapt 5/8"27 Threads to a HotShoe Mount

Made this part to be able to use my portable flash with a microphone boomstand. Converts the 5/8" thread of the mic stand to a hotshoe, very simple.

Help me out

Using the affiliate Link gives me a small kickback and doesn't cost you anything, so if you need filament anyways, using the link below would be very kind!

Green PLA: https://www.amazon.de/gp/product/B07D718FST/ref=as_li_ss_tl?ie=UTF8&linkCode=sl1&tag=sharky05-21&linkId=b9e7b0ec0f543b1c49f030dd8a6d1181&language=de_DE

Black PLA: https://www.amazon.de/gp/product/B07D718FST/ref=as_li_ss_tl?ie=UTF8&linkCode=sl1&tag=sharky05-21&linkId=b9e7b0ec0f543b1c49f030dd8a6d1181&language=de_DE

Yellow PLA: https://www.amazon.de/gp/product/B07D718FST/ref=as_li_ss_tl?ie=UTF8&linkCode=sl1&tag=sharky05-21&linkId=b9e7b0ec0f543b1c49f030dd8a6d1181&language=de_DE

Print Settings

Printer Brand:

Creality

Printer:

Ender 3 Pro

Rafts:

Supports:

Yes

Resolution:

0.2

Infill:

100

Filament: Kaisertech PLA Black

Notes:

Support: Touching builtplate only, put the flat side of the hotshoe down.rnrnMaterial: Anything goes but you need to have a good layer adhesion

Category: Camera

Tagi

flash lighting adapter astrophotography photography portrait microphone thingiverse speedlite hotshoe microphoneclip microphoneboom microphoneboomarm flashholder