Canon Eos M Hotshoe Grip
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A Hotshoe Attached grip Specifically for the Eos M
- Ocena
- 5 / 5
- Polubienia
- 14
- Pobrania
- 113
- Wydruki
- 1
- Wyświetlenia
- 985
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution
This is a Custom Hotshoe Grip i made specifically for my Canon EOS M, since its kinda ass to properly grip, especially with magiclantern.
Thus I created this small thingy, took about an hour and 5 Iterations but it works now.
I added a spot for the Thumb, and the whole thing rests relatively flush against the camera body, some light wobble I might be able to fix later, but not sure.
The inspiration for this Grip came from @sascha 's grip for a Fuji, it worked ok on the EOs M, but it was just too off.
The Model included here are made for my FDM printer, including its bad tolerances, so it might be a bit loose if you have a very precise printer.
I can only reccomend PETG/ABS/Nylon etc. since this is a functional print and it might be exposed to the sun, I can also reccoment printing it upside down on a PEI sheet for better looks.
You can comment any issues, I might even work on them.