1 / 2
Dual \ Triple Vertical Towel Hooks
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a remix to produce two vertically aligned towel hooks on a simple backing plate, fixed using VHB tape.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 10
- Wydruki
- 0
- Wyświetlenia
- 94
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial
I had an old set of towel hooks that were aligned vertically to fit on a slim strip of wall in the kitchen. However, their design, using rubber grips, meant that after a few years they weakened and the towels fall out. I therefore made a replacement by setting two of AK3D's towel hooks into a backing plate.
It was designed to be held to the wall without screws, using 3M VHB tape.
Additional: Three towel version added!