30+ Ikea Simple Hooks Mega Pack - Vol 1 - Ikea Skadis - Commercial Use Allowed
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a series of hooks, j hooks, double hooks etc for the Ikea Skadis pegboard. Its based on my old thingiverse pack
- Ocena
- 0 / 5
- Polubienia
- 25
- Pobrania
- 60
- Wydruki
- 0
- Wyświetlenia
- 343
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution
Work in Progress
This is based on my older mega hook pack from Thingaverse. But I reworked the hooks to try and accommodate the slotted pegboard style of the Ikea Skadis. Because I kept it to a single hanging hook entry, this could actually work with other slotted pegboards.
Esty folks, yes of course, you are free to go and print and sell these.
Need a hook design that isn't included? Drop a comment and I'll add them in the next update.
Naming
The files are named based on the length of the bar. So if it says “bar_15” that's a bar-style hook, that is 15mm long on the active part of the hook.
Printing
I recommend printing them in their default (flat side). This will give you the best strength for the hooks. If for any reason you find your printer is over-extruding (and the hooks aren't fitting in the slots), you can reduce the scale to 95%. But they fit fine for me on my 3 printers.
Version History
Version 2.0 - 2025/09/09
- Recreated and checked hooks for non-manifold geometry
- Reduced polygon count by ~25% (easier on older marlin devices)
Version 1.0
- ~30 different types of hooks, J Hooks and what I like to call Vampire Bites
- Sizes range from about 10mm to 50mm