PiColeco Alternate Cartridge
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This cartridge design by jaystonian more closely matches a ColecoVision cartridge, now it can hold the PiColeco.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 33
- Wydruki
- 0
- Wyświetlenia
- 131
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Toys
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This cartridge design by jaystonian more closely matches a ColecoVision cartridge, so I modified it to hold the wonderful PiColeco by A. Ottaviani. (https://github.com/aotta/PiCOLECO)
It has a Pico reset button where the "o" in Coleco is, so you can flash the Pico without taking the case apart.
Everyone's printer is different so the "buttons" STL will print 12 various sizes of the flash button, one will fit.
Print it with supports. I don't have a multi-color printer so I made some STLs of what I thought someone with one could use to align the logo and the front of the cartridge, I hope it works for you.
Even if you don't have a multicolor printer you could probably offset both the multicolor STLs (so they are not under where it homes), print the #2 STL with one color, clean the alignment markings off, then zero and print the #1 with a different color. I didn't try this so good luck, hope it works.
Category: Toys & Games