Anycubic i3 Mega/S PSU Cover for 92x92x14 Fan
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Thanks to Nixxon999 for the remix and kuehmayer for the original design! I closed the top holes so that there will be…
- Ocena
- 5 / 5
- Polubienia
- 9
- Pobrania
- 76
- Wydruki
- 1
- Wyświetlenia
- 606
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Anycubic Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
Thanks to Nixxon999 for the remix and kuehmayer for the original design!
I closed the top holes so that there will be a (hopefully) better airflow in the PSU.
The Fan should be mounted to blow the air out of the case, so the holes can suck cooler air in from the side.
I also thinned some walls (it's a messy and quick edit) to save some time an filament.
Hopefully it will work this way.
Danke an Nixxon999 für den Remix und kuehmayer für das Orginal-Design!
Ich habe die oberen Löscher geschlossen um den Airflow zu verbessern.
Der Lüfter sollte so montiert werden, dass die heiße Luft nach außen geblasen wird. Dadurch sollte sich das PSU kältere Luft durch die seitlichen Löscher und nicht die warme ziehen.
Dazu habe ich noch ein paar Wände schmaler gemacht (eher schnell und unsauber), dadurch sollte man etwas Zeit und Material sparen.
Hoffentlich klappt das alles wie gedacht.
Print Settings
Printer:
Anycubic i3 Mega
Rafts:
Doesn't Matter
Supports:
Yes
Resolution:
0,25
Infill:
100
Filament:
SUNLU PLA
Grey
Notes:
I use the treesupport for the overhang.
Ich benutze den Tree-Support für den Überhang.
Category: 3D Printer Parts