140mm Dual CPU Fan Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Made this for my NZXT Havik CPU cooler. The fans were hanging loose off the heatsink due to the rubber bits holding…
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 19
- Wydruki
- 0
- Wyświetlenia
- 539
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution
Made this for my NZXT Havik CPU cooler. The fans were hanging loose off the heatsink due to the rubber bits holding them together drying out and crumbling. NZXT stopped making this model years ago, so they were no help in offering replacement parts, and none of the metal clips I could find seemed like they would fit the heatsink design.
I threw this together to hold the fans in place and allow them to be draped on top of the heatsink. It seems to stay in place well enough, but there's nothing actively securing it, so I wouldn't recommend this for anything but stationary towers.
The Havik's heat sink is ~61.4mm wide, with little divots each positioned ~10.75mm from the center (so a total gap of ~21.5mm between them).
Category: Computer