Walking Stick / Crutches Holder for Rollator
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A holder to attach to your rollator or walking frame, for your walking sticks/crutches
- Ocena
- 0 / 5
- Polubienia
- 12
- Pobrania
- 45
- Wydruki
- 0
- Wyświetlenia
- 501
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Medical Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
I sometimes need to take my crutches with me when using my rollator (to help with steps etc), and found that to buy a holder for my make of rollator was going to cost nearly £70 for the pair!!
So do I but them? Heck no! I nab my partners Prusa and set about designing some!
These are designed to go on a Drive Nitro Rollator, but would fit many other rollators with similar frame layouts.
I use the double holder, but have added files for a single holder, for people who only have one stick.
Hope this helps someone :)
In addition to the top and bottom holder you will need:
- large zip ties (4 for the single holders / 5 for the double holders)
- Used to attach each section to the frame - passed through the holes marked with blue arrows in the last picture
- A length of approx. 10cm buttonhole elastic
- Once you have cut the elastic to size I would recommend gently melting the ends with a lighter to prevent fraying
- The elastic should be passed through the central slot (highlighted in green in the last photo/diagram). The buttonholes in the elastic can then be hooked over the posts on the sides (circled in green) to hold the sticks in place, make it easy to remove the sticks when needed.