Liczymy pasujące modele…
Supplement comfort legs for acer nitro 5 (25 mm). 2024/02/25 New model stilized. I add the f3d to be able to modify, as it seems that there may be different sizes or models between countries. Acer nitro 5, legs to slightly tilt the…
Quick and easy print. Printing: This print does not require any supports. See the last picture for print orientation in slicer (brim recommended) Material: I suggest printing "launcher" in PETG for optimal strength and flexibility. Misc:…
This is a replacement pullstart housing & cord spool for a 1/10 .18 or larger nitro engine with a 12mm hex. You can view the Fusion360 project here... https://a360.co/3bgZUxZ Obj, skp and f3d files included. EDITS 30/03/18 Has anyone…
UPDATE 30/12/2018 v2 uploaded after testing of v1 with two fuel tanks, no problems with the teeth but some problems with the hexagon, too much backlash, so here is new version with better sizes. 47 teeth gear for rc nitro car, created…
Just a simple sign to put your WCW display
This is a mounting bracket for the Skyflar strobe light designed to mount to an Air Conception Nitro titanium paramotor frame (V1 and V2). Mounts to the carbon fiber spars with zip ties and allows the strobe to stick through the net and…
Le fichier mf suffit Couches 20 mm Remplissage 100% mais moins doit pouvoir fonctionner Comptez 5 heures , oui c'est long le TPU
shredded my spur gear because of a loose engine mount. found no replacement, so i made one myself. mod1 with 47 teeth. 5cm diameter, inner hole is about 2,52cm. screw holes are spaced evenly and are 3,3mm in diameter. screw holes are…
Let me indroduce you to škoda favorit pickup for 1:10 nitro slash!! This communist car is perfect fit for smelly nitro engine!! 3D printing settings Bodywork is made of TPU95 Parts such as bumper, wing, mirrors are glued. 4x M3 nut and…
the old pullstarter broke so I did a new one
These are replacement thumb sticks for the CRKD Nitro Deck. They require a thumb cap. I use either the Newdery PS5 replacement caps or Skull & Co XBOX caps. The difference between Newdery and Skull is just the disc size, 17mmx2mm…
Explore this meticulously designed 3D model of a Multiboard holder perfectly constructed to hold gas regulators including nitrogen, argon, and oxygen, The model is a creation of MS Creations, a renowned designer in the 3D modeling space…
This model is for a travel case for nitrolingual spray (GTN) to help keep the glass vial safe.
I wasn’t a fan of the original rims on the Alesis Nitro Mesh Kit pads, so I designed a lower-profile replacement. The base is printed in PETG with 10% infill and 4 walls for strength and rigidity. The upper rim is printed in TPU with 1…
A customer had a dashboard panel that was in poor shape so he took it off and sent it to me. I duplicated it and printed him a few to fix the problem. This is the dashboard panel or the master power switch on a Nitro bass boat. In the…
I really like the simple, compact design of the Nitrox Analyzer by Tony Land. However, it wouldn't work with any OLED displays currently sold on Amazon. The OLED display glass is larger than the cutout. It required too many modifications…
Anti-rotation cymbal holder for the Alesis Nitro Mesh Kit. First photo show the part supplied with my kit without anti-rotation mount vs printed version of this model (printed by JLCPCB, SLA, black resin). Second photo shows an example of…
This will be familiar to any USAF Aerospace Ground Equipment maintainer, the Self Generating Nitrogen Servicing Cart! I have designed this to be very easy to print and put together, requiring no support material, adhesives, or hardware.…
Got board so i made this wheel for my 1:8th R/C nitro car. Better to be printed with a raft as well as supports.
The .470 Nitro Express is a rifle cartridge developed by Joseph Lang for dangerous game hunting in Africa and India. These files allow you to print an exact replica of this cartridge or brass case. Both the files can also be used to print…
Model of the .500 Nitro Express cartridge with bullet and casing in seperate files so you can print them in differnet colors. 1:1 scale within 0.01mm (sorry no freedom units here). Use superglue to conect the parts. Casing is made to be…
Minitron is a project to transform your Prusa Mini into an upside-down CoreXY 3D printer. The project is split into two parts, the software and hardware. This page covers the hardware and assembly of the Minitron printer. The software of…
Model of the _ cartridge with bullet and casing in seperate files so you can print them in differnet colors. 1:1 scale within 0.01mm (sorry no freedom units here). Use superglue to conect the parts. Casing is made to be ligth and cheap to…
This is a part I made for my Air Conception Nitro 200 e-start Paramotor. I started by wanting to move the ignition switch to a place where I could turn it on after the motor was on my back and evolved into an hour meter, battery monitor,…
This is a primer panel designed for the Air Conception Nitro 200 paramotor. It holds the primer bulb and shut off valve and is designed to use the same components used by Aviator PPG who originally designed and sells the primer system.…
The highly desirable and reliable Jena 1D two-stroke internal combustion engine designed for aircraft. It was produced in the GDR in the years around 1960. It was the smallest of its kind. I have one of these left over from long ago and…
Tire of little guns? Doubt some dummy will try to take over the world with melee weapons? Then print a BFG for your Dummy. This nitrogen recoil gun includes hand grip, shoulder stock. and 12x zoom scope. It includes a safety first shooter…
Code and instructions soon https://fixolab.dev/en/blog/ambilight Model available at Maker World https://makerworld.com/en/models/574743 Models https://makerworld.com/@fixolab
For those required to carry the small spray bottle of nitro with you at all times here is a carrying case to protect it and prevent accidently pushing the plunger. I made it with enough extra length to fit 4 aspirin pills wrapped in…
XLPower Nimbus Nitro / 550 / 550 V2 Vertical Fin V2 XL55T03-1 Thicker version required longer screw (2.5x10mm + 3x35mm)
USB C cover for Nitrokey 3C Print: Layer height: 0.12 mm No support 15% infill Skirt
My Nitrokey 3A Mini fell apart and the PCB doesn't work on its own because it's too flat. This replacement case is a very snug fit for it and needs to be carefully assembled. Printed on a MK3S+ with a 0.4mm nozzle and 10mm layer height…
Battery holder for 8 NewBeeDrone Nitro Nectar Gold 300mAh. Can also fit other batteries. Dimension for holes; 7x11mm. This model was printed in PETG, but PLA might be better. Based on thing:3228636
A frame riser and a locking key for the Alesis Nitro Mesh Kit. It allows you to adjust the drum frame's height in a simple way without a lot of screwing and unscrewing, maintaining also the frame bubble-centered. It rises the frame in a…
Print Settings Start at a slower speed and work your way up Do the same with temperature And fan speed Enjoy!
Interested in selling physical prints of my designs? Want to access a growing library of exclusive 3D models? 🚀 Unlock exclusive benefits and premium access with my membership. Membership: Exclusive models + Commercial License --- NITRO…
Box na kapesníky jsem vytvořil jako vtipný doplněk do svého auta. Samolepka s popisem byla zakoupena na Aliexpressu: https://www.aliexpress.com/item/1005005976658285.html?spm=a2g0o.order_list.order_list_main.29.20e91802KlTD2k
The liquid nitrogen phase separator (diffuser) facilitates the separation of gaseous and liquid phases during liquid nitrogen dispensing from a tank. This 3-D printed phase separator is an open hardware model and distributed as digital…
Simple holder for your nitro surge unit so you always know where to find it.
Remix of a drum key and hex wrench holder, this one made for the vertical posts of the Alesis Nitro Max electronic drum kit. Printed with ABS for durability, but PLA should be fine as long as you don't remove it too often. No supports…
Mounting bracket for the power switch on an AirConception Delta Paramotor Frame The standard mounting location is over top of the left shoulder which is almost impossible to reach while wearing the ParaMotor. Includes hole for optional…
Custom TPU intake for traxxas nitros! utilizes the original cylindrical foam inserts for the .15/2.5 engines. the longer runner improves air velocity and structuring before mixing with fuel. performs BEAUTIFULLY on ported .15s. tested on…
Dygma Defy stand for Nitro Concept chair. Can be screwed to the handles with two screws using the original screw holes.
Mounting bracket for the power switch on an AirConception Delta Paramotor Frame The standard mounting location is over top of the left shoulder which is almost impossible to reach while wearing the ParaMotor. Includes hole for optional…
End caps for the frame for Drive Nitro Rollator Walker, these caps fit right above the frame where the wheels are at. I printed mine in ABS
Alesis E-Drum Wall Mount Bracket. Cymbals, Drum Heads, and Module Bracket used to attach single E-Drum Head to wall. Mount Your Alesis Edrum Kit to a wall to save space. Play it standing up or sitting down. Make Sure Bracket Screws into…
I made a nitrous bottle bead, I always liked the look of these bottles so I chose to make a bead.
A cable clip for Alesis nitro max drum kit lemme know anny issues
Chemistry Joke: Have you heard about hexanitrosobenzene - the new oral contraceptive? It has "NO" in all six positions.
🐌💨 NitroSnail – The Fastest Snail Alive Say hello to NitroSnail – a fiery little rebel leaving speed limits behind! This flame-boosted snail features a dynamic, turbo-inspired shell and a bold personality that makes it perfect for a…
The Nitroshot+ Ultra is the second generation of my giant pool noodle darts! V2 brings more accuracy, more flight stability, and more realistic proportions! My design is built for 55mm diameter pool noodles cut to lengths of 125mm. The…
This 3D printable model is designed to snugly fit the Nitro Rugged Bee, featuring specific openings for charging, the power light, and top plug-ins - meaning it never needs to be removed from its case. For mounting, it's versatile, it can…
3 parts for XRAY XB8'25 - 1/8 NITRO OFF-ROAD CAR recommended material: PETG or other durable material support needed infill: 100%
You'll need 4 of these, one for each leg. You can probably reduce the strength a bit to save time and filament. I set my infill to 8% (normally 15%) and it worked fine. Remove the rubber foot from the original leg and put it on the bottom…
Dart Zone Nitroshot Blitzfire2 Mods T-Pull + Printed Pin Rear Sight Insert for improved aiming Bottom Rail Cover for some additional color accent Spring Spacer (for the stock spring) All mods can be easily reversed if desired.…
This is a cover for avoiding the evaporation of liquid nitrogen from a cooling trap dewar. It was especially designed for Isotherm dewar models 13C, 14C and 15C with an inner diameter of 90 mm. The middle hole for the cooling trap has a…
This is a replacement pin for the loop section of the WRC Nitro Speed 1:43 slot car track. Just use pliers to break off the defective pins and push this part from the back of the track piece. You shouldn't have to use any glue but you can…
Brushless DC motor actuated impeller pushes liquid nitrogen up the pipe. Check a short demo here and here . Please, follow on GitHub for instructions.
simple stand for N2 bottle that clips on the main body tight, the body clip is 70,7mm in diameter. This clip function lets you hold the bottle tight, simple cone with opening from top would let the bottle wiggle a bit since it has a brim…
Before you go further! This model is available for free for all my supporters in Printables Club 🧡 Consider joining my club to have access to all ⭐⭐⭐ exclusive projects ⭐⭐⭐ and be part of my community! This project is for personal use…
Spice up your vacuum cleaner with this Nitro Gas decoration! This model is compatible with any vacuum cleaner, and it does not affect any of the cleaner’s performance. No need for supports, just print it standing upright!
Easy wall mounting for your Worx Nitro WG186E Trimmer / brush cutter. Mounts to the wall with 4 screws. The WG186E trimmer slots in to the mount between the motor and operator handle. Two bumps are added on the top to avoid the unit…
taller base see picture for dimensions
I needed a way to upgrade my SD card storage and I figured what better way than incorporating the blaster hobby? Design inspired by a Nitroshot+ dart and includes separate compartments for organizing up to 6 cards. Included in the files…
This is the exact model as the original, I just split the top and the bottom in Meshmixer so I didn't have to cut the models apart. You will now need a top and bottom x 2.
Fits snuggly over one of the vertical leg posts of the Alesis Nitro Mesh drumkit. Can hold light books or sheet music up to 15 mm thick. Diamond cut-out saves a bit of print time and material, but I've also included a solid version of the…
Simple Drop In Rear Sight Insert --> improved aiming Dart Zone (Nitroshot) Blitzfire 2 Simple drop in Rear Sight Insert for improved aiming with the stock front sight of the Blitzfire2. The wide channel of the stock rear sight only allows…
Replacement foot for the Alesis Drum Rack, allowing attachment of the ratchet strap to keep the rack more rigid and prevent the feet from bending out. Pull off the existing feet and fit these. Hook the ratchet strap and tension slowly as…
Based on the original design, I've removed the included Sapphire and Radeon logos to make it more stealthy. Should be printed using filament with high thermal resistance, ideally ABS.
These are replacement thumb sticks for the CRKD Nitro Deck. They require a thumb cap. I use either the Newdery PS5 replacement caps or Skull & Co XBOX caps. The difference between Newdery and Skull is just the disc size, 17mmx2mm…
There are Jericho/Raider shells out there for all sorts of ammo, but I couldn't help but notice that nobody had made a shell for the most sensible and effective ammo type of them all. To fill that significant gap, I've created this. I…
Nitro .15 Engine Mount for RC Airplane. 2 files mounting holes for a Cox medallion .15 and Os Engine .15 Designed to be screwed onto a firewall. Its has 3 degrees of right and down thrust. No supports needed. Printed in PETG 4 outer…
This is my design for a manual peristaltic pump for refueling airplanes and cars with nitro or glow engines. Adaptable to other uses. Self-priming. Everything is 3D printed except for the four bearings, which are off-the-shelf (one…
Explore this meticulously designed 3D model of a Multiboard holder perfectly constructed to hold gas regulators including nitrogen, argon, and oxygen, The model is a creation of MS Creations, a renowned designer in the 3D modeling space…
Engineered up this shoe brush to attached next to the wheel and let you get mud and goose droppings off your shoes. Print in uploaded orientation with plenty of walls and infill to maximize strength. No supports should be needed. Use an…
NOTE: If you like our designs, please consider supporting our work by joining our Patreon channel—your support helps us keep creating and growing our community! This is a set of pieces that can be used to recreate the Unitron fig at 500%…
NOTE: If you like our designs, please consider supporting our work by joining our Patreon channel—your support helps us keep creating and growing our community! This is a set of pieces that can be used to recreate the Unitron Chief fig at…
This model is for a travel case for nitrolingual spray (GTN) to help keep the glass vial safe.
I wasn’t a fan of the original rims on the Alesis Nitro Mesh Kit pads, so I designed a lower-profile replacement. The base is printed in PETG with 10% infill and 4 walls for strength and rigidity. The upper rim is printed in TPU with 1…
A customer had a dashboard panel that was in poor shape so he took it off and sent it to me. I duplicated it and printed him a few to fix the problem. This is the dashboard panel or the master power switch on a Nitro bass boat. In the…
Replacement volume knob for Alesis Nitro Mesh DM7X controller. Picked up kit on C/L for teenage son and rehabbed it. Volume knob was missing so I printed one up. Figured I'd share it in case anyone else needed one. Drilled a tiny hole…
Remixed the sound deflector, now it's an "hot air from fan grill" deflector for my Acer Nitro 5. the thickness is 1.5cm, the same as my laptop's, and it's 8cm long. the fan grill opening is 5cm wide and so is the round deflector, so no…
Created a motor mount, top plate with battery tray. Installed a brushless motor using stock spur gear and a 32P 19T pinion. I printed them using abs-CF for strength. I printed the motor mount on the side for strength. Printing flat makes…
Replacement wingnuts for the bar clamps on the Alesis Nitro Mesh series. May work with others. Bought a DM7X off C/L only to find that some of the wingnut housings for tightening the bar clamps on the drum rack were broken. Also had a…
This cable clip will protect your power port and keep the plug horizontal. It also adds some protection incase the cord was yanked on. Some brief sanding may be necessary for the inside clip where the cord goes. But I'd rather have it…
This is a sligtly modified version of the long-narrow insert for @re1neke's excellent battery case modified to fit the Nitro Nectar 300mah NX69 race batteries. I found the Nitro Nectar 300mah 1s batteries to be a pretty snug fit in the…
Introducing a body shell inspired by the legendary Škoda 200 RS. You need four m3 bolts and nuts for body mounts, everything else is glued. Printed from TPU. Long live nitro engines! Down with green tyranny!
This is a mounting plate for a Bushnell Phantom 2 golf GPS designed to fit the Bagboy Nitron golf push cart umbrella mount. The mount is custom fit to allow for both the flip up compartment and magnetic pad on the side to remain…
This is a tee holder for the Bagboy Nitron golf push cart. The holder is intended to fit in place of the umbrella holder C-clamp on the side of the cart. It holds seven standard width tees and requires the original screw from the umbrella…
Paramotor Nitro200 Tank cup the diameter and shape fit as Air Conception Nitro 200 paramotor tank cup
I'm currently working on a project I've dubbed µGen, to see if I can make a useful miniature generator out of a nitro RC car engine I bought online. However, because the engine will be sitting still instead of flying through the air or…
Use this deshroud mod to quieten your Sapphire Nitro+ 7900XTX. Uses 120mm or 90mm case fans for optimized air flow. I recomment controlling the fans via the motherboard trough "fan control", altough a gpu to casefan pin adapter might work…
Use PETG for the print so it can stand the sunlight. Gcode-file has minimum enforced supports for the print. I didn't want to hide airtag inside battery case, because its part metallic and interferes with signal, so this was a better…
