Frame / Drum Rack Extension for Alesis Nitro Mesh Drumkit (and any other frame with internal diameter Ø33cm wide)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Adjust the frame height without allen keys
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 52
- Wydruki
- 0
- Wyświetlenia
- 314
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Music
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
A frame riser and a locking key for the Alesis Nitro Mesh Kit. It allows you to adjust the drum frame's height in a simple way without a lot of screwing and unscrewing, maintaining also the frame bubble-centered.
It rises the frame in a range of 5,5/17,5cm by steps of 2cm, and stays hidden into the legs when no needed.
The key fits into the hole and remains still, supporting the structure.
I have originally designed the risers for my daughter, since sometimes she likes playing drums. She is 130 cm tall while I am 180 cm tall and I play drums with a high posture, and I don't like screwing and unscrewing everytime.
There are two different sets of risers (Ø32.5mm and Ø32.2mm). The internal diameter of the frame tubes is Ø33mm so the Ø32.5mm riser has enough clearance to fit inside it. Occasionally the tube may have undergone slight deformation (it's my case), so the Ø32.2mm is the overall best pick to avoid assembly issues and eventual sanding.
Suggested print settings:
Material: PLA - PLA+
Layer Height: 0.2mm
Walls/Top/Bottom Layers: 3
Infill: 15% (Riser) - 40% or more (Keys)
Orientation: Print the key as is loaded in the slicer (right side on the plate) to have it printed strong enough to support the frame weight.
Support: Snug (Riser - Saves filament); Normal-No tree (Key)