Liczymy pasujące modele…
This drum mount is sized for any Alesis brand electronic drumset. its made to clamp a 38mm tube on the big clamp and a 19mm tube on the small one. It is printed in two parts and epoxied together so that each clamp can have the optimal…
A simple tablet and/or sheet music holder I designed for my Alesis Nitro Mesh E-Drum rack. Since it is a customizable OpenSCAD design it's possible to create variants fitting other racks, as long as the is a horizontal pipe at the right…
I have had the Alesis Nitro Mesh kit for a few years now, and I absolutely love them...with one exclusion: The rims are way too high Now keep in mind I am not a drummer by trade, and I have the kit just for kicks-n-giggles. But I find…
Fits snuggly over one of the vertical leg posts of the Alesis Nitro Mesh drumkit. Can hold light books or sheet music up to 15 mm thick. Diamond cut-out saves a bit of print time and material, but I've also included a solid version of the…
I designed this for the Alesis Nitro Max edrum kit. Its to help color code it for video games like clone hero, rock band, guitar hero, etc. They are designed to be small and easy prints. The parts are universal, so the “Symbol” print…
A quick (approximate) OpenSCAD replica of the original Alesis Nitro Mesh E-Drum rack feet design. Easily customizable for any height and drum rack pipe diameter (not only for the Nitro kit). The original rack pipes have a diameter of…
Because I drop drum sticks a lot, I made this drum stick holder. It holds 24 + 2. I can the freely drop drum sticks as I practice, and pick them up when I'm finished, instead of during a song. Good times. I only printed the 24 + 2 because…
UPDATE:I changed the tall (td-17) mount top to grip on both sides. Because mine eventually broke. Booo! I also made it solid. Infill need not use much more than supports anyway. I printed the update in TPU. Works well so far. Music Tray…
A colleague from work asked me to make him a model to raise his Alesis Mesh kit drums...I created a simple solution that allows you to adjust the height and be more ergonomic. Enjoy it…
Remix with the rims at the same height as the mesh heads
A cable clip for Alesis nitro max drum kit lemme know anny issues
SUPPORT MY WORK - DONATE 👉 https://wise.com/pay/me/victormarquesm1
Drumstick Holder for Alesis Nitro Max Frame (Ø 35mm) Fits two Drumsticks, less than 19mm in Diameter. Prints without supports.
I have DW cymbal arms on my drum rack and needed to mount an alesis ride cymbal. This is a simple fix to allow that to work. Just remove the bottom cymbal threaded washer and replace with this part. The cymbal thread is m8x1. I modeled…
Support pour Rods (baguettes) à insérer dans le tube vertical
I remixed this so I could use Roland V-Drum cymbals on my Alesis cymbal stand mounts. This replaces the plastic pivot and reuses the screw that was holding it to the post. There are two screw holes: One is locked rotation and the other is…
Replacement wingnuts for the bar clamps on the Alesis Nitro Mesh series. May work with others. Bought a DM7X off C/L only to find that some of the wingnut housings for tightening the bar clamps on the drum rack were broken. Also had a…
A frame riser and a locking key for the Alesis Nitro Mesh Kit. It allows you to adjust the drum frame's height in a simple way without a lot of screwing and unscrewing, maintaining also the frame bubble-centered. It rises the frame in a…
3D Model Description – Alesis Drumstick Holder (37 mm Tube) 3D‑printed drumstick holder compatible with Alesis racks, designed to mount securely on a 37 mm tube. This holder can store up to 4 drumsticks, giving you quick and easy access…
Replacement fader/slider knob for an alesis MultiMix12 FireWire printed in PLA with no supports
I wasn’t a fan of the original rims on the Alesis Nitro Mesh Kit pads, so I designed a lower-profile replacement. The base is printed in PETG with 10% infill and 4 walls for strength and rigidity. The upper rim is printed in TPU with 1…
Un support pour tablette à fixer sur le montant de la batterie de la marque ALESIS. À imprimer avec support.
Pièce de réparation pour Alesis Turbo Kit
This small Drumstick Holder mounts directly on top of your one of your brackets for the rack. There are no screws needed, adhesive tape is also not required. It holds 4 Sticks at once. You might have to do some filing if your sticks are…
eDrums tend to have the bass pedal creep forward as you play, since there is no heavy bass drum to anchor it. I made holes that match the spike on the bass drum and small holes to stitch through the drum mat. It hasn't moved in Months.…
Alesis E-Drum Wall Mount Bracket. Cymbals, Drum Heads, and Module Bracket used to attach single E-Drum Head to wall. Mount Your Alesis Edrum Kit to a wall to save space. Play it standing up or sitting down. Make Sure Bracket Screws into…
wall mount for Alesis elevate 3 studio monior may fit other speakers. 14W x 20L outside diameter. the more infill the stronger it will be. no supports or any other special directions. warning, its a long heavy print that takes a lot of…
Replacement foot for the Alesis Drum Rack, allowing attachment of the ratchet strap to keep the rack more rigid and prevent the feet from bending out. Pull off the existing feet and fit these. Hook the ratchet strap and tension slowly as…
This is a simple music stand for the Alesis Q Mini compact MIDI controller; the idea is that you print two or three of these, clip the controller into them, and prop music up between the controller and the sloped back of the stand. There…
I created this adaptation bar to mount roland pads on electronic drums. To maintain the stability of the structure, a 10 mm aluminum bar must be inserted inside
Replaces the original plastic side covers. Model is right side, mirror for left side. Designed to be glued down, otherwise it will tip over to the front. Designed in Onshape:…
Put on the on the top of one of the poles. its 38.22mm for the circle slightly larger than needed to fit easily.
The pitch wheel has tabs on the return spring that tend to break, this design replaces the small tabs with solid stops. Print in PLA or PETG with paint-on supports as shown in the photos. Clear filaments will allow the backlight to shine…
I wasn’t a fan of the original rims on the Alesis Nitro Mesh Kit pads, so I designed a lower-profile replacement. The base is printed in PETG with 10% infill and 4 walls for strength and rigidity. The upper rim is printed in TPU with 1…
Anti-rotation cymbal holder for the Alesis Nitro Mesh Kit. First photo show the part supplied with my kit without anti-rotation mount vs printed version of this model (printed by JLCPCB, SLA, black resin). Second photo shows an example of…
If you are a drummer beginner, it can be really hard to learn all the cymbals and pads names. While the pads are just snare and Tom 1-3, the cymbal names are really complicated to learn. And that is exactly when this model comes in handy.…
Remix of a drum key and hex wrench holder, this one made for the vertical posts of the Alesis Nitro Max electronic drum kit. Printed with ABS for durability, but PLA should be fine as long as you don't remove it too often. No supports…
You'll need 4 of these, one for each leg. You can probably reduce the strength a bit to save time and filament. I set my infill to 8% (normally 15%) and it worked fine. Remove the rubber foot from the original leg and put it on the bottom…
Put on the on the top of one of the poles. its 38.22mm for the circle slightly larger than needed to fit easily.
The boom arms on the alesis commandX mesh set, for my application, are completely useless and in the way. just makes the cymbal higher and farther away than it needs to be. this is an adapter meant for removing the stupid boom arm from…
This is the exact model as the original, I just split the top and the bottom in Meshmixer so I didn't have to cut the models apart. You will now need a top and bottom x 2.
The pitch wheel has tabs on the return spring that tend to break, this design replaces the small tabs with solid stops. Print in PLA or PETG with paint-on supports as shown in the photos. Clear filaments will allow the backlight to shine…
ALESIS drums Phone Stand, Diameter 38 mm. Movable phone holder. Better to print in ABS (3 walls)
Designed this for my kids' Alesis Debut electronic drum kit. Only fits the horizontal bars of the frame. Tested in PLA at 0.3mm layer height and 100% infill. No supports needed if printed in default orientation of file.
Drum rims to cover Alesis Surge, or any other MIDI drumkit with 8in & 10in rings. They are meant to fit very snugly, and can either be kept as pieces to save space, or superglued together (though you will probably need some colored…
I found the Alesis nitro frame too low so created this quick extension, Printed upright with support. Fusion 360 file included.
That's my second iteration of an anti-rotation cymbal holder for the Alesis Nitro Mesh Kit.
This design is a headphones holder for Alesis DM10 Studio electronic drum rack. I mounted it a 37 mm vertical tube of the rack, so it should work for any tube that has a 37 mm diameter. I use Vic Firth isolation headphones, so your…
I've used cbaoth 's raised feet for a while but I found them a bit slippery (even with TPU pads below them). So I decided to make my own risers so I can keep the original rubber feet. I'm attaching STL as well as STEP files for any…
Note: these prints are very hacky and simple. Would not recommend printing because: long print time large amount of print material not straightforward assembly/tuning lack of stress-testing. Requires 5A drum stick for mounting Tape (for…
Print flat and it's be nice and strong. You'll need supports for the reinforcing parts. It was a 5 or 6mm bolt - sorry I don't recall and sold the drum set now. I cut up someone else's bracket (I don't recall whose sorry) and added the…
A convenient stick holder that makes it fast to grab and put back. Use 1mm EVA foam between parts.
Anti-rotation cymbal holder for the Alesis Nitro Mesh Kit. First photo show the part supplied with my kit without anti-rotation mount vs printed version of this model (printed by JLCPCB, SLA, black resin). Second photo shows an example of…
Update: moved to use this model at 70% size: https://www.printables.com/model/879158-midi-keyboard-desktop-stand-raiser-feet
