Alesis Nitro Max mod for Rack Foot
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replace rack foot with a mod allowing the Ratchet Strap to keep the frame rigid
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 11
- Wydruki
- 0
- Wyświetlenia
- 224
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Music
- Licencja
- Creative Commons — Attribution — Noncommercial
Replacement foot for the Alesis Drum Rack, allowing attachment of the ratchet strap to keep the rack more rigid and prevent the feet from bending out.
Pull off the existing feet and fit these.
Hook the ratchet strap and tension slowly as you adjust the feet until the rack's legs are all perpendicular to the floor.
The flat ribbon should fit under or around any pedals, but you may need to swap the ratchet end if it gets in the way.
Settings:
Printed with supports
Material - PLA
Infill - 25%
Layer Height - 0.28mm
Walls - 4
Install:
Link every second foot to create two triangles, making the rack rigid.
Note:
Please don't over-tension it. This merely needs to hold the feet in position and prevent them from slipping or standing skew.
Feel free to mod as you like - this is one solution, I'm sure you'll come up with something better.