Alesis Nitro Max mod for Rack Foot
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Replace rack foot with a mod allowing the Ratchet Strap to keep the frame rigid
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 11
- Makes
- 0
- Views
- 226
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Music
- License
- Creative Commons — Attribution — Noncommercial
Replacement foot for the Alesis Drum Rack, allowing attachment of the ratchet strap to keep the rack more rigid and prevent the feet from bending out.
Pull off the existing feet and fit these.
Hook the ratchet strap and tension slowly as you adjust the feet until the rack's legs are all perpendicular to the floor.
The flat ribbon should fit under or around any pedals, but you may need to swap the ratchet end if it gets in the way.
Settings:
Printed with supports
Material - PLA
Infill - 25%
Layer Height - 0.28mm
Walls - 4
Install:
Link every second foot to create two triangles, making the rack rigid.
Note:
Please don't over-tension it. This merely needs to hold the feet in position and prevent them from slipping or standing skew.
Feel free to mod as you like - this is one solution, I'm sure you'll come up with something better.