Alesis Nitro Mesh / Generic E-Drum Rack Feet (Raised)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A quick OpenSCAD replica of the original Alesis Nitro Mesh feet, raisable and customizable for any rack pipe diameter.
- Ocena
- 5 / 5
- Polubienia
- 15
- Pobrania
- 136
- Wydruki
- 1
- Wyświetlenia
- 1201
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Music
- Licencja
- Creative Commons — Attribution
A quick (approximate) OpenSCAD replica of the original Alesis Nitro Mesh E-Drum rack feet design. Easily customizable for any height and drum rack pipe diameter (not only for the Nitro kit).
The original rack pipes have a diameter of 35.25mm and the feet are made out of rubber, meaning they slightly squeeze on (tighter fit). All STLs I provided use an inner diameter of 36mm which is slightly more so that they should still fit when printed with non-flex material.
I also provided STLs with a mounting hole and less inner material, as well as solid versions. Which one you use should just be a matter of taste, the difference in print time and material used should be neglectable.
I personally use (and only printed) the 50mm symmetric (non-solid) version.