1 / 5
Headphones Bracket for 37 mm Tube on Alesis DM10 Studio Drum Rack — zdjęcie 1
1 / 5

Headphones Bracket for 37 mm Tube on Alesis DM10 Studio Drum Rack

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This design is a headphones holder for Alesis DM10 Studio electronic drum rack. Fits 37 mm diameter tube.

Ocena
0 / 5
Polubienia
28
Pobrania
164
Wydruki
0
Wyświetlenia
561
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Audio
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

This design is a headphones holder for Alesis DM10 Studio electronic drum rack. I mounted it a 37 mm vertical tube of the rack, so it should work for any tube that has a 37 mm diameter. I use Vic Firth isolation headphones, so your mileage may vary on what headphones will work. This holder clamps to the bar using 2x M4x20 mm fasteners and 2x M4 nuts. M4 nuts fit into the 2 hex recesses.

You will need:

2x M4x20 mm button head socket cap fasteners

2x M4 nuts

I recommend printing with PETG to avoid loosening over time which tends to happen with PLA under constant load.

I shared a STEP file in addition to the STL for easy rework incase anyone is interested.

Print Settings

Printer Brand:

Creality

Printer:

CR-10

Rafts:

Doesn't Matter

Supports:

No

Resolution:

0.2

Infill:

25%

Filament: Overture PETG White


Notes:

PETG is recommended to maintain clamping forces against the tube.

Category: Audio

Tagi