Alesis Nitro Mesh - Replacement Rim
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I have had the Alesis Nitro Mesh kit for a few years now, and I absolutely love them...with one exclusion: The rims
- Ocena
- 5 / 5
- Polubienia
- 25
- Pobrania
- 265
- Wydruki
- 3
- Wyświetlenia
- 1800
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Music
- Licencja
- Creative Commons — Public Domain
I have had the Alesis Nitro Mesh kit for a few years now, and I absolutely love them...with one exclusion:
The rims are way too high
Now keep in mind I am not a drummer by trade, and I have the kit just for kicks-n-giggles. But I find myself hitting the rims way more frequently than I want to. I've seen other pads that have much shorter rims , or barely no rim at all, and that appealed to me.
The replacement rims are in 2 parts. The main part (Base) is printed in ABS or PLA with a fairly rigid infill of 75% or greater. The top part should be printed in a TPU that matches the hardness you are looking for. I went with 100% infill with the 1 style of TPU I had on-hand, which is a bit more firm than I wanted it to be, but it still gets the job done.
The base should be printed upside down to avoid the need for supports.
This is a remix based on the work of jamangic1 on thingiverse. Their original thing can be found here: https://www.thingiverse.com/thing:4715031