1 / 1
Vasemode Nitro box Crash Bandicoot Crash Team Racing — zdjęcie 1

Vasemode Nitro box Crash Bandicoot Crash Team Racing

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

All credit goes to flowalstick. Please donate to them before you donate to me. I simply made some modifications in…

Ocena
0 / 5
Polubienia
5
Pobrania
83
Wydruki
0
Wyświetlenia
439
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

All credit goes to flowalstick. Please donate to them before you donate to me. I simply made some modifications in blender to add a top and change the bottom to be flat. I can make another version with the holes in the bottom if people want it.

I attached the gcode I used. It's a solid model of flowalstick's design to allow printing in vasemode. I printed at 30mm as a test and it looked great. Took 1 hour.

Please check out my other work and buy me a redbull if you're feeling generous https://www.buymeacoffee.com/LysisToKill

Print Settings

Printer:

Pyramid A.1

Rafts:

No

Supports:

No

Resolution:

Basically a CHEP profile with some mods (https://www.chepclub.com/cura-profiles.html)

Filament: other PLA Blue


Notes:

Used a brim, stuck really well.. Might want to add more of a gap between the brim and the model, I had to trim it up a tiny bit bc the brim stuck

Category: Containers

Tagi