BetaFPV Air65 Rugged case

This is a remix from 2 different projects on here, but i made it with the intention of using the best from both worlds, its a air 65 or alike tiny whoop case.

________________________________________________________________________________________________

Models that inspired it. (it wasn't allowing me to post it under (Remix), but i do want to give props to who gave me the idea)

https://www.printables.com/model/258431-rugged-box-parametric

https://www.printables.com/model/1293387-betafpv-air65-tinywhoop-case

https://www.printables.com/model/1317845-betafpv-air65-case

________________________________________________________________________________________________

It holds 10 11mm batteries and 9+1 15 mm batteries with the combined battery holder i made for the woop or an additional 10 11mm batteries depending on the insert , it also holds the spare screws, USB C adapter and an 80mm 1.5mm Allen key for taking the holder off (they are usually 60mm in length you should be fine), and it holds 3 packs of 31mm props comfortably.

Essentially a grab and go all in 1 carry and storage case

link to my battery holder

https://www.printables.com/model/1410938-betafpv-lava-550mah-protector-cage-and-air65-adapt

Print settings: standard 0.2mm layer height, 0.4 line width enable detect thin walls, use split into objects tool to get all the parts separated and you do need to mirror the left side for the smaller batteries, you can print it out of anything you like but i do recommend ABS and PETG for the latches just in case you leave it in your car.