CPAP nasal mask towel bar drying rack
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Easily and cleanly dry your CPAP nasal mask w/o fear of damage. Hangs from a towel bar.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 16
- Wydruki
- 0
- Wyświetlenia
- 146
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Medical Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I was hanging my CPAP nasal mask with 2 metal hooks to dry after washing it every morning and was worried about potentially damaging the mask. It was also just not the most stable. So I designed this drying tray which hangs from a towel bar.
The bottom of the tray was made by specifying a hex infill and setting top and bottom layers to 0. I then added a layer modifier to the top of the model and set some top layers to give the edges a nicer finish.
The hooks are printed separately from the tray and fit very snugly into the slots in the tray. Be careful and you don't need glue.
I've included the separate STLs just for completeness. You'd need to print 2 hooks if you print from the STLs.