Roborock S7 - LEGO Platform
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
LEGO platform for Roborock S7 – turn the unused water tank slot into a playful display!
- Ocena
- 0 / 5
- Polubienia
- 81
- Pobrania
- 30
- Wydruki
- 0
- Wyświetlenia
- 2446
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial
Roborock S7 – LEGO Platform
Did you know there’s a hidden spot in your Roborock S7 for a LEGO display? Well… now there is!
Do you rarely use the water tank in your Roborock S7? I do – most of the time it just sits on a shelf. That’s why I designed this add-on: a LEGO platform that clips into the same slot where the tank normally goes.
The platform locks onto the central post using a flexible clip. You can build directly on the vacuum or prepare your creation at your desk and then snap it in place. A spaceship bridge, a battle turret, a concert stage – anything is possible! My son loves it.
⚠ A few things to keep in mind:
- Make sure your build isn’t taller than the available clearance – not all minifigs will fit under low furniture.
- Keep your LEGO within the vacuum’s outline to avoid hitting walls or furniture during cleaning.
Print details:
- 2 parts: the platform and the clip
- No supports required
- PLA works perfectly
- The clip presses into the platform’s socket (glue is optional, but usually not needed)
- I’ve included 3 platform versions: standard, smaller pins, and larger pins. On my printer the standard size fits best, but depending on tolerances you may prefer the other variants.