Perfect fit - DJI Mini 4 Pro propeller guards - 3D scanned
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Accurately modelled propeller guards for the DJI Mini 4 Pro
- Ocena
- 5 / 5
- Polubienia
- 35
- Pobrania
- 543
- Wydruki
- 4
- Wyświetlenia
- 1440
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Perfect fit Mini 4 Pro propeller guards!
I noticed that all the mini 4 pro front prop guard designs were using a 3d scan of the mini 3 pro, even if stated otherwise. Most m4p owners were forcing the front guards on, if they didn't snap them in the attempt! Successful makes were just mini 3 pros
So, I found a 3d scan of a mini 4 pro and redesigned the connecting points of the front guards to connect properly to a mini 4 pro.
The rear guards from Madcap sit well, so I left them as-is and included them here for convenience.
Printed mine in PETG but I'm sure they'd work in PLA
They fit on the drone perfectly, and thin enough to fit in the shoulder bag when not in use - MUST HAVE print for any mini 4 pro owner!
Any print settings should work - no supports needed
mine:
PETG
15% infill
2 walls
0.2mm layer height