1 / 2
DELL/EMC AX4-5 Replacement Caddies (3.5" and 2.5")
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I created these for a project with an old EMC/Dell JBODThey were originally made for an EMC MPE, but this should be…
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 11
- Wydruki
- 0
- Wyświetlenia
- 93
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Share Alike
I created these for a project with an old EMC/Dell JBOD
They were originally made for an EMC MPE, but this should be the same enclosure and therefore the same caddy designs for the Dell AX4 and possibly AX5 lineup. Note that these don't include a locking mechanism and rely purely on friction to stay in place.
I printed them in PETG with no issues, but you'll probably want to enable brims with how skinny some of the parts are.
Category: Other