Prusa Core One Door Handle Wedge
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Wedge for anchoring door handle.
- Ocena
- 5 / 5
- Polubienia
- 27
- Pobrania
- 180
- Wydruki
- 6
- Wyświetlenia
- 1590
- Oceny
- 8
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
My core one kit door handle started to separate. Either I did something wrong or the adhesive strips failed very quickly. I saw the holes on the handle and thought it would be saner to have a threaded solution. Found chwiede's design but wanted something a little different. So I threw a quick design in tinker cad togeher. I wanted solid threading so I went with a m3 x 4mm L x 5mm heat set insert.
I ended up printing two of these out of ASA-GF with 30% Gyroid infill, 4 vertical shell perimeters , and 5 solid top and bottom layers. Likely overkill but solid print.
Hardware.
M3 BHCS or FHCS of appropriate length.
M3 x 4mm L x 5mm heat set insert (voron standard).
I used a M3 BHCS 8mm's as I had them on hand. The design allows for threading past the insert so use what screw you have with a low profile.
Attaching bgcode for print estimate only. I have a wiper setup on my printer so use the bgcode at your own risk.