Prusa Core One Door Handle Wedge
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€1.00 – €1.22 net (excluding VAT)
For file: coreone_door_wedge_0.4n_0.2mm_ASA_39m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €1.11 excluding VAT (range midpoint).
- Weight reported by the author
- 11 g
- Print time reported by the author
- 39.6 min
- Source material
- ASA
- Estimate material
- ASA
- Estimate printer
- Bambu Lab X1 Carbon - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Wedge for anchoring door handle.
- Rating
- 5 / 5
- Likes
- 27
- Downloads
- 180
- Makes
- 6
- Views
- 1,590
- Reviews
- 8
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
My core one kit door handle started to separate. Either I did something wrong or the adhesive strips failed very quickly. I saw the holes on the handle and thought it would be saner to have a threaded solution. Found chwiede's design but wanted something a little different. So I threw a quick design in tinker cad togeher. I wanted solid threading so I went with a m3 x 4mm L x 5mm heat set insert.
I ended up printing two of these out of ASA-GF with 30% Gyroid infill, 4 vertical shell perimeters , and 5 solid top and bottom layers. Likely overkill but solid print.
Hardware.
M3 BHCS or FHCS of appropriate length.
M3 x 4mm L x 5mm heat set insert (voron standard).
I used a M3 BHCS 8mm's as I had them on hand. The design allows for threading past the insert so use what screw you have with a low profile.
Attaching bgcode for print estimate only. I have a wiper setup on my printer so use the bgcode at your own risk.