Music stand tray
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Music stand tray with quick release, two sizes, fits any music stand, no hardware.
- Ocena
- 4,5 / 5
- Polubienia
- 30
- Pobrania
- 115
- Wydruki
- 2
- Wyświetlenia
- 729
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Music
- Licencja
- Creative Commons — Attribution — Noncommercial
An accessory tray for your music stand.
The tray clamps on to your music stand with a quick release. It fits a 24 mm Manhasset stand and can be shimmed to fit other stands. I've included a few shims that fit other stands I use, and it can be fitted to any other stand smaller than 24mm with a simple modification.
Printing instructions: Use PLA, 3 walls, 25% infill. No supports needed. No hardware is required - just print and use.
Print the following files:
Bracket, lever, clamp - needed for all stands
Tray large OR tray small
Adapter Wenger OR Adapter Manhasset - to use with these brands of stands
Adapter Manhasset AND whichever shim fits your stand - to use with folding stands
The provided shims will fit most round music stands. However, if yours is between sizes you can use the blank shim model. Load it in your slicer and add a negative space matching the diameter of your stand.
Update May 2026:
I've redesigned the bracket to have the two body parts print in place together, adjusted the design to work on additional stand types, and increased the tolerance between the tray and bracket to ease assembly.