Wafer Dippers in many sizes
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Wafer dippers to put Silicon chip and dip it in chemical liquid to make fabrication process.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 8
- Wydruki
- 0
- Wyświetlenia
- 69
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I'm a phD student and I work in nano and microfabrication. These dippers are very helpful to dip in chips or something in chemical fluids, mainly when the time of the dive is required.
I printed all models with an Enders 3 v3 SE model using PP (polypropylene) filament. Print with PP filament is VERY hard, and I needed several tests to succeed eventuallyto succeed eventually. For adhesion and to prevent warping, I used B700 glue. If you have a closed printer, maybe PP tape without glue is sufficient.
Printing Settings:
- Printer Model: Creality Enders 3 v3 SE
- Filament: PP
- Quality: 0.2mm
- Infill: 40%
- Printing Temperature: 235 ºC
- Plate Temperature: 0 ºC
- Plate Temperature at Initial Layer: 100ºC
- Flow: 110%
- Printing Speed: 40 mm/s
- Cooling: No
- Support: No
- Build Plate Adhesion: Brim
Any questions, please send a comment!