Wafer Dippers in many sizes
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Wafer dippers to put Silicon chip and dip it in chemical liquid to make fabrication process.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 8
- Makes
- 0
- Views
- 69
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I'm a phD student and I work in nano and microfabrication. These dippers are very helpful to dip in chips or something in chemical fluids, mainly when the time of the dive is required.
I printed all models with an Enders 3 v3 SE model using PP (polypropylene) filament. Print with PP filament is VERY hard, and I needed several tests to succeed eventuallyto succeed eventually. For adhesion and to prevent warping, I used B700 glue. If you have a closed printer, maybe PP tape without glue is sufficient.
Printing Settings:
- Printer Model: Creality Enders 3 v3 SE
- Filament: PP
- Quality: 0.2mm
- Infill: 40%
- Printing Temperature: 235 ºC
- Plate Temperature: 0 ºC
- Plate Temperature at Initial Layer: 100ºC
- Flow: 110%
- Printing Speed: 40 mm/s
- Cooling: No
- Support: No
- Build Plate Adhesion: Brim
Any questions, please send a comment!