BTT Eddy mount for Elegoo Neptune 4 Pro default bed probe position
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Custom mount for the BIGTREETECH Eddy probe on the Elegoo Neptune 4 Pro, designed to replace the stock bed probe.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 25
- Wydruki
- 0
- Wyświetlenia
- 266
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a custom mount for installing the BTT Eddy probe on the Elegoo Neptune 4 Pro in the same location as the stock bed probe.
Other available mounts I tried either reduced the probe’s usable scanning area or clashed with Elegoo’s large “wind tunnel” part cooler on the X-axis. This design avoids both issues by keeping the probe in its original position, maximizing scan coverage,, and making setup simpler.
Included files:
STL and 3MF for direct printing
Fusion 360 (.f3d) source file for editing/customization
The mount prints easily and installs cleanly without interfering with other components.
Pictures attached show the mount in place with the Eddy probe installed.