BTT Eddy mount for Elegoo Neptune 4 Pro default bed probe position
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Custom mount for the BIGTREETECH Eddy probe on the Elegoo Neptune 4 Pro, designed to replace the stock bed probe.
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 25
- Makes
- 0
- Views
- 264
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a custom mount for installing the BTT Eddy probe on the Elegoo Neptune 4 Pro in the same location as the stock bed probe.
Other available mounts I tried either reduced the probe’s usable scanning area or clashed with Elegoo’s large “wind tunnel” part cooler on the X-axis. This design avoids both issues by keeping the probe in its original position, maximizing scan coverage,, and making setup simpler.
Included files:
STL and 3MF for direct printing
Fusion 360 (.f3d) source file for editing/customization
The mount prints easily and installs cleanly without interfering with other components.
Pictures attached show the mount in place with the Eddy probe installed.