Shining 3d - Aoralscan Elite - Vertical cradle and mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Cradle mount for Shining 3D Aoralscan Elite scanner with magnet pocket for auto power-down
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 137
- Wydruki
- 0
- Wyświetlenia
- 634
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Medical Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This cradle is designed for the Shining 3D Aoralscan Elite intraoral scanner. It keeps the scanner vertical for quick access, prevents accidental drops, and integrates a magnet pocket that triggers the hall-effect sensor to power the scanner down when docked.
Features:
- Vertical mount for convenience and protection
- 10×10×2 mm magnet pocket for automatic power-down
- Through-hole for zip tie fastening
⚠ Important: The provided 3MF file includes a pause at layer 316 to allow inserting the magnet during printing.
If you print from STL, make sure to check your gcode and manually set a pause at the correct height to insert and seal the magnet.
Recommended material: PETG (for durability and heat resistance), though other filaments should work as well.
The mounting plaque (as shown in photos) is specific to our cart, so I didn't include it, but it's not a problem to share it if needed