1 / 7
Shining 3d - Aoralscan Elite - Vertical cradle and mount — image 1
1 / 7

Shining 3d - Aoralscan Elite - Vertical cradle and mount

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Cradle mount for Shining 3D Aoralscan Elite scanner with magnet pocket for auto power-down

Rating
0 / 5
Likes
3
Downloads
137
Makes
0
Views
634
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial — Share Alike

This cradle is designed for the Shining 3D Aoralscan Elite intraoral scanner. It keeps the scanner vertical for quick access, prevents accidental drops, and integrates a magnet pocket that triggers the hall-effect sensor to power the scanner down when docked.

Features:

  • Vertical mount for convenience and protection
  • 10×10×2 mm magnet pocket for automatic power-down
  • Through-hole for zip tie fastening

 

⚠ Important: The provided 3MF file includes a pause at layer 316 to allow inserting the magnet during printing.

If you print from STL, make sure to check your gcode and manually set a pause at the correct height to insert and seal the magnet.

Recommended material: PETG (for durability and heat resistance), though other filaments should work as well.

The  mounting plaque (as shown in photos) is specific to our cart, so I didn't include it, but it's not a problem to share it if needed

Tags