Search results: oral

Oral-B Toothbrush Stand

Oral-B Toothbrush Holder This one is a more simple version from the once you can find. I did not wanted to have a big piece where you could store more than just the toothbrushes. Therefore, I designed a slim-version. Enjoy.

Oral-B Electric Toothbrush Station

Organizer for Oral-B electric toothbrushes, fits 4 plus one charger. Highlights Removable drip tray for easy cleaning. Neat management of charger cable. Elegant minimalist design. Easy print, no supports needed for any part. Printing Tips…

Toothbrush + Induction Charger Wall Mount (Oral-B & Philips Sonicare)

At long last, the electric toothbrush has a functional, aesthetic and permanent place in the bathroom- and it's not the sink countertop! The induction charging base, which used to only appear during weekly recharging, nests perfectly in…

Coral Frag Plug Stand

It prints perfectly on my mk3s with no supports. Make sure to print in PETG and wash the part so that it is reef-safe.

Oral-B Toothbrush Holder

This is a remix of 3aDri's Oral B toothbrush stand . I found that the peg was a bit too tight for my Pro 6000 toothbrush, so the stand would stay attached when I picked it up. I shortened the peg and then made adjustments to the pedestal…

Oral-B stand

Stand for Oral-B Electric tootbrushes. A remix of the work by Coolshrimp . The maker included a link to the design in TinkerCAD, but the page could not be found. I changed the design to have 2 stubs for handsets and one place for the…

Electric Toothbrush Holder for a family (2x Philips Sonicare + 2x Oral B)

Had the issue that in our family, all have an electric toothbrush. They were standing next to the sink and always fell over. So I created this stylish toothbrush holder for the 4 of us (there are 2 bigger holes for the parents toothbrush…

Oral-B iO Toothbrush Head Holder

Holder/stand for 3 Oral-B iO toothbrush heads.

Floral Detail Halloween Skull Keychain (Remix)

I printed in PLA Infill: 15% Layer Height: 0.10mm Supports: Yes, organic If you like my work consider Buy me a coffee 😊

Oral-B Electric Toothbrush Station (2x Remix)

This is a remix of my previous model Oral-B Electric Toothbrush Station , here reduced in size to fit two toothbrushes and one charger base. Highlights Removable drip tray for easy cleaning. Neat management of charger cable. Elegant…

Floral Paper Clips

Floral paper clips for fun office. Printing from PLA, without supports, layer height 0.2 mm. Adjust the height as you need.

Oral-B stand

Oral-B stand for 1 charger, 2 toothbrushes and 4 brush-heads. There is also improved version of this model: https://www.printables.com/model/1106132-oral-b-stand-ii Printing: Printing is very easy (no supports). I printed this with PLA,…

Oral B Wall Mount Charging Station

Use double-sided tape for mounting. There are pre-drilled holes in the back of the model if you want to mount the charging station to the wall with screws. Added custom text models, Mom, Dad, Prusa …

Toothbrush Charger Wall Mount (Oral-b)

Oral-b toothbrush charger wall mount The technical drawing is the dimensions for the double sided tape I use to hang it on the wall Toothpaste tube holder Print instructions 3 perimeters 15% infill

Oral-B tooth brush holder

Simple wall holder for Oral-B tooth brush. CAD file included.

Oral-B Electric Toothbrush Station (3x Remix)

This is a remix of my previous model Oral-B Electric Toothbrush Station , here reduced in size to fit three toothbrushes and one charger base. Highlights Removable drip tray for easy cleaning. Neat management of charger cable. Elegant…

Oral B Universal charger stand

Oral B electric toothbrush holder with cable/ plug tidy. Fitting most sizes including the newest IO circular designs. Wrap-around cable design with the secure plug end holder hidden at the bottom. Mounting options : Screw or adhesive…

Oral-B Electric Toothbrush Mount for Base and Brush Head

Adapter for an Oral-B electric toothbrush mount with two models for Toothbrush Base Holder Toothbrush Head Holder The holder fits for Oral-B Genius Series, Smart Series and Pro Series toothbrushes and brush heads; not iQ Series. STEP file…

Oral-B IO Socket Adapter

Banish the clutter of electric toothbrush cords from your bathroom countertop with this sleek solution! If your spouse has been nudging you to tidy up and you own an Oral-B IO Series 6/7/8/9 toothbrush (the models sans a display charging…

Oral-b brush holder

A simple holder for 5 oral-b brushes or oxyjet tips. I have taped it to the wall with some generic bathroom foam tape. Print, share, remix

Oral-B iO Brush Stand / Zahnbürstenhalter

You can print it easily with no supports. I've added a new version 2, where the angle is better and the brush holds a bit tighter.

Electric Toothbrush Head/Oral-B Holder With Drip Tray / 2-4 Slot Sizes

A minimalist holder for Oral-B electric toothbrush heads. Features a drip tray to prevent liquids from getting on your counter. Rounded edges make it easy to clean and provides a nice aesthetic appeal. Bar at the bottom of each slot…

Oral B Toothbrush Holder

It was my first print with the filament which was given with Ender 3 V2 printer. The quality was very satisfying for the first printing.

Perforated Coral Reef

Based on Perorated_corall_lampshade by Patrik (Thingaverse 480044) Added a base using Prusaslicer (2.5.0) Printed on MK3S+ with MMU2S 0.30 layer at 50% infill for base and 10% infill for coral. Printed at 210/205C and 67/67C

Oral B

The gcode of this model was tested on Elgoo Neptune 4 PLUS, 0.2 mm layer, 18% Infill, 45% base and 75% toothbrush holder

Gridfinity Oral B IO brush holder

Here's a small 1x1 Gridfinity block that can hold up to 4x Oral B IO brushes. I also made a 2x version as 4 brushes can be a bit tight. On the 4x model the stands are placed so that there's a smaller gap against the wall, where the 'back…

3D Coral Lamp: Versatility and Unique Style

The 3D Coral Lamp is a unique and versatile piece, perfect for adding charm and innovation to any space. Inspired by the beauty of corals, it is designed to be 3D printed without the need for supports, ensuring an easy manufacturing…

ORAL B nabíječka 220V CZ

Klasická originální nabíječka Oral , složená do obalu . Nikde neplandá kabel a je to vloženo přímo do zásuvky.Rozměry jsou pro českou zásuvku (220V - CZ). Složení dle přiložených fotek - nemělo by to být složité. Deska co je uvnitř patří…

Coral Dragon Skull / Korallen Drache Schädel

Model of a Dragon Skull with Stand (CoralDragon) Printed on Prusa MK04 and Bambu PS1 Scalable: Bigger should be no Problem, Smaller might work but you probably will get problem with the small thin tipps. Support: Yes, organic / only on…

Another Oral-B (Braun) Electric Toothbrush stand

1.- Introduction As with all prints I do, all start or from a need, a fix or a lust-to-have. The original Orab-B Electric Toothbrush has a stand that is connected to the charger, something I do not like to be next to the washbasin (Water…

Oral-B Toothbrush Stand Single

Remix of the Toothbrush Stand for single Toothbrush Head

Dual Oral-B iO 8 holder

Sleeve holder Dual Oral-B iO 8 holder for mine and my girlfriend's toothbrush handle plus heads. Reduces the cluster on our bathroom mirror shelf. Uses the original toothbrush head holder. This version does not include the charger as we…

Oral-B charger and toothbrush holder

A Oral-B charger base with hollow space to neatly tug away the electric cort. A convenient magnetic brush holder. Fun to use and nice to look at :) Print instructions Print charger base and toothbrush base as you like (I printed @ 0.2…

Spin (Spiderman Miles Moralis) Wall Art

Printed in Prusament PLA: Jet Black Lipstick Red (@ layer 0,5) Galaxy Black (@ layer 1,0) Pristine White (@ layer 1,5) 0,1 IS Fast Detail 100% infill

Oral b head stand with dripping tray.

Update: Widen the hole a bit, making it easier to mount the tootbrush. New version do not need any supports. Small head stand for standard electric toothbrush heads. Since the brushes tend to drip some leftover toothpaste, I included a…

Oral B tandenborstelhouder voor stopcontact | Dutch Oral B Toothbrushholder for outlet socket

Printed on a Bambu X carbon, 0,12 layer height, tree support and gyroid filling.

Oral-B Pulsonic Slim Luxe 4900 - Cable Management

Cable Management for a Oral-B Pulsonic Slim Luxe 4900

Oral-B Professional Care Charger Wallmount

This is a sideways wallmount adaptor for the charger / stand. It fits quite strong so you have to snap the charger in. You can choose between right- or lefthand mounting. Print instructions Printer: PRUSA i3 MK3 Layer: 0,2mm Supports: No…

Oral-B Ständer für zwei Ladeadapter

Die Adapter werden durch Einpressen festgehalten. Oral-B stand for two charging adapters The adapters are held in place by pressing in

Oral-B Tooth Brush Holder & Cord Concealer

This design is used with an Oral-B electric toothbrush - the primary toothbrush holder (motor and heads) seats on top of this holder. This holder conceals hides the ugly cord so it is not laying out on the counter. I am printing this in…

Floral lamp shade

The lamp shade is 18 cm in height and fits an E14 lamp socket with a hole diameter of max 28.8 mm. The attached gcode is sliced to print in vase mode.

Saltwater Aquarium Coral Frag Tray

155mm Long Tray Surface, 10mm Frag Plug Wholes. See attached photo for dimensions. Printed Horizontally to minimize Supports. 11h48m print time.

Oral-B iO Holder

This holder or stand, whatever you want to call it, prevents the toothbrush from tipping over. The base and the toothbrush are magnetic, but the magnetic strength is moderate at best. Therefore I created this little holder/stand… thing!

Tootbrush head holder (Oral-b)

The model consists of two parts : Tootbrusth head holder Plate The head holder can be printed in different colors to distinguish head wetter this is based on family member or head type. And in the end the mix of color spices up the model!…

Toothbrush stand for 3 Oral B toothbrushes.

An elegant toothbrush stand for 3 toothbrushes of model Oral B. The hole where the toothbrush is placed is 28mm in diameter so the toothbrush can't be larger than that. This is just a stand and has nothing to do with charging the…

Oral-B Toothbrush Station

A station for Oral-B toothbrushes made by two pieces: 3 Toothbrush holders and changer stand Box for toothpaste and others Three heights available 35mm 45mm 55mm (the one shown on the photos) The two pieces are connected by a set of plugs…

Oral-B stojánek

Stojánek na el. zubní kartáček Oral-B a na náhradní hlavice doplněn o přihrádky na mezizubní kartáčky, zubní nitě aj. drobnosti. Vložený gcode - model má prodyšné dno, aby nedocházelo k hromadění nečistot a tím i množení bakterií.

Squash Bot (RoboRally)

From the board game RoboRally. Modeled from scratch in Blender. Print instructions Tilt back 45 degrees for best results.

Oral-B 3 brushes stand

Printed from PLA without supports, pretty straightforward ;-)

OralB toothbrush single stand

It makes your toothbrush really stable and catches all the water. I recommend printing it with 4 perimeters for rigidity. I printed mine in deep black to match my toothbrush. #Printables

Braun Oral B Pulsonic Slim Stand

Since our bathroom is quite small, we opted to not have the charging base out all the time. But because the foot of the toothbrush is quite small, it tends to fall. This stand is easy to print and gives the brush a good amount of…

Oral-B Pulsonic adhesive wall mount

Oral-B Pulsonic adhesive wall mount, use with 1.1mm thick 3M VHB tape. Print with PETG, use brim as it has small small bed contact surface.

DS3D4U Floral Lamp Shade

Tested print settings included in print file. Print was tested in PLA with a LED bulb Not for use with incandescent or fluorescent bulbs. Colors with high translucency such as an undyed plastic recommended for the bottom of the print to…

Oral-B CrossAction Travel Toothbrush Cover with air-holes

Best printed with higher layer height for speed but anything works. I printed with 0.6mm nozzle at 0.3mm layer height in PLA on a water-patterned PER printbed and painted-on organic supports. Supports are required and pre-added in the…

(Remixed) Beehive-Inspired Floral Arrangement Vases

This model was created by https://www.prusaprinters.org/de/social/119334-fortinmike and remixed by AJD.

OralB double toothbrush stand

Printed from PLA on Prusa Mini+ with 0,4 mm nozzle, took 2h 24min with 0,25 layer thickness.

Floral-pattern Box

Print in spiral vase mode.

Cap for Exergen Temporal Artery Thermometer

Have you ever lost the cap to your Exergen Temporal Artery Thermometer? We've lost all of ours, and they're not easy to find as they're clear. Now, you can keep your temperature sensor clean and safe with this replacement cap! It's…

Braun Oral B Wall Mount

Small toothbrush stand for the round charger of the Genius X 20000. Couldn’t find one anywhere else so I designed my own. It has a snug fit 💪☺️ Printed in Prusament Galaxy Black with 20% infill. No supports needed.

Dual Oral-B Pro 2 Toothbrush Holder

Description This 3D-printed toothbrush holder is designed specifically for Braun Oral-B Pro 2 electric toothbrushes. It allows for easy wall mounting, saving space and keeping your toothbrush conveniently accessible. The holder features a…

Oral-B iO Series 8 Zahnbürstenständer

Ständer für 2 Zahnbürsten und Zahnpasta

Braun Oral-B & Philips Sonicare & Soocas Toothbrush holder

I have created this simple model for four toothbrushes - Braun kids Oral-B, Soocas, and Philips Sonicare. Printed with PLA as 2 items - base and top, glue it together.

CORAL REEF LAMP

The Coral Reef lamp, printed with photoluminescent filament, originates within the B.O.N (Based on Nature) project to promote the protection of biodiversity through aesthetic pedagogy and design. Design by Reyes Leon and Andres Infantes…

oral b toothbrush wall adaptor

wall type station for original braun charging station. socket suitable for schuko type f. braun type 3757

OralB bathroom organizer charger dock

Hi all, Thanks for downloading this bathroom organizer. The model is simple printing-wise, just one part so no assembly is required. The printer settings are still a work in progress I'll update them in the future. Best orientation for…

koralik prst

OralB electric toothbrush small case

Tired of tossing your toothbrush loosely into your bag while traveling? This toothbrush travel case is designed to keep your toothbrush clean, protected, and easy to carry—whether you're commuting, hiking, or flying

Oral-B Stages Kids dual stand

Toothbrush double stand for the AA battery-operated "Oral-B Stages Power Kids" model, which has a different base than the rechargeable version. There is also a wall mounted version

Oral-B toothbrush support for IKEA Dragan toothbrush holder

I hate when my Oral B toothbrush falls at the bottom of my toothbrush holder. So I decided to print a little support that make it easy to stay at the top without it falling.

Oral B Genius 10100S brushstand/driptray

Driptray and brushstand for multiple Oral B electrical brushes. Designed based on Oral B Genius 10100S. Infill: 8% Walls: 3 No support is needed. Happy printing!

Oral-B iO Series 10 - Anti Fall Charger Stand

As Noverium, my toothbrush kept falling behind the shelf so I made a stand to prevent this. I remixed the idea of Noverium to fit the 10 series' stand. Printed in PLA, 0,28mm layer, 70mm/s, 10% infill, 1 wall, 2 bottom/top layers => 16g…

Oral-B Essential Floss holder

Perfect size and easy use. The holder has an indent on the back side for better glue adhesion.

Markierungsring für Braun Oral-B Aufsteckbürsten/ Marking ring for Braun Oral-B brush heads

Zumindest teilweise verzichtet Braun auf den Farbring der Oral-B-Aufsteckbürste und hat die Konstruktion so geändert, dass keine vorhandenen Farbringe genutzt werden können. Stattdessen ist ein kleines Symbol zur Unterscheidung der…

Oral-B (Brawn) Electric Toothbrush horizontal holder

1.- Introduction As with all prints I do, all start or from a need, a fix or a lust-to-have. Long ago (Few years ago) I posted a model for a toothbrush stand here in Printables. Now comes the second edition, which is a horizontal holder…

Plugs for Coral Grid holder

Hi, these are the plugs which I use for stuff like quarantine, frags, or as you can see in the pictures to grow algae (jokes on me). There is also the plug version which has a base which can be glued with cyanoacrylate to your rocks. Keep…

Oral-B toothbrush holder with groove

This is a remix of a Oral-B toothbrush holder with a groove to get rid of excess water. While the original model is very simple, I have found out that the holes in the bottom of each toothbrush head holder do no drain water because there…

composition of floral squares

Oral B Stand/Water Drop Collector

Like all owners of the Oral B Vitality toothbrush, I noticed that once I finished brushing my teeth and rinsed the toothbrush and put it back in its original base, over time it created an annoying water stain on my toothbrush, caused by…

Toothbrush Holder for 10x Oral-B

for my Oral-B Pulsonic Clean I am open to questions or adjustments

Floral Decorated Sword

Floral Decorated Sword. Gcode is split in 3. has added connectors.

Snap Guard for Oral-B Series 9

This is a drop protection accessory for the Oral-B iO Series 9 toothbrush. It snaps directly onto the original charging base and prevents the toothbrush from being knocked off. Why Since the iO toothbrush is only magnetically attached, I…

Oral-B OxyJet Water Tank Cover

This cover for the Oral-B OxiJet oral irrigator prevents dust and other particle from collecting in the water tank if the lid is kept open. In general, the toothbrush heads dry faster when placed upside down with the lid open, preventing…

Oral-B Stages Kids dual mount

Toothbrush double wall mount for the AA battery-operated "Oral-B Stages Power Kids" model, which has a different base than the rechargeable version. There is also a stand version

Floral Risers for Flat Lay Photography

Floral riser rings for flat lay photography of floral blooms

Toothbrush Holder for/Zahnbürstenhalter für Oral-B

Toothbrush Holder for/Zahnbürstenhalter für Oral-B

Supporto per spazzolino elettrico Oral B serie iO

L'ho stampato in PETG ma anche PLA va bene. ho utilizzato una Prusa M4KS impostando i seguenti parametri: altezza: 0,25 structural 3 perimetri 15% infill senza supporti

Oral-B Toothbrush and Toothpaste Holder

Holder for an Oral-B Pro (Type: 3710) Toothbrush and a wide-cap Toothpaste tube. I printed with these settings: Layer Height: 0.15 mm Infill: 50% Lines Walls: 0.8 mm (2x 0.4 mm) Top/Bottom: 0.9 mm Line: 0.4 mm Z Seam Align: random Scarf…

Moral action for Ukraine - I need your help!

Print these little buttons. Distribute them to neighbors, passers-by and friends. With the help of these gifts get to the awareness of the collection to help Ukraine. Here's how it works: 1. Donate a button, say it's a gift from you - for…

Oral-B stand

No supports needed.

Oral hygiene Organizer

I needed a place where i can store all of our hygiene products so I designed this organizer. Photos show a V1 of the model that had a problems with tolerances so a remade it and i upload a V2. I also posted a STEP file so you can adjust…

Floral Easter Egg

Ideal for centerpiece for Easter Dinner, especially when combined with the Wavy Easter Egg

Ablage für 2 Oral-B und Zahnpastertube

Ablage für 2 Oral-B und Zahnpastertube. PETG mit 0,15 auflösung / L=23mm0 B=100mm / Tubenring 30mm Innen

Miles Morales Spiderman

If you like my work and want to support me bringing you new content please consider supporting me on Patreon https://www.patreon.com/FotisMint Pre-Supported .stl and .lys files for resin included by Charro Zuck support services.

Floral Bookmark Collection

🌸 Discover the Elegance of Reading with our Floral Bookmark Collection! 📚✨ Key Features: 🌺 Blossoming Designs: Immerse yourself in the beauty of nature with our set of 10 exquisite floral bookmarks. Each bookmark features a unique and…

OralB Toothbrush Head Case - Strengthened Close Latch - Easy Print in place

This is an OralB electric toothbrush head protector/case for when travelling, it can stop dirt and other items from touching the head of your toothbrush. Includes air vents to prevent moisture build up inside the case. How to use - place…

Floral Skull

A pretty skull with flowers. Well, pretty weird and maybe a little scary but oddly nice. I think... I think she likes me. Tree Supports on build plate only Powered by image-to-3D from MakerWorld (https://makerworld.com/makerlab/imageTo3d)

Minimalist Oral-B Braun Electric Toothbrush Wall Mount

Every model I found for hiding the cable of the Braun / Oral-B toothbrush wall charger was not enough good/polished/perfect/minimal for me so I designed this and I hope you will enjoy this too. The design is based on the german 55mm…

Floral Detail Halloween Skull

Used Poly.cam to scan a floral detail Halloween themed skull. Thought it came out really well and wanted to share it. Etsy Page: https://demambaprints.etsy.com Tik Tok: https://www.tiktok.com/@demambaprints Polycam scans here:…

Oral-B Brush Stand

My design of an Oral-B brush stand for perfect drying. I made designs for up to 5 brushes and additional modifications. Mod1 has additional ribs for dental floss holder at the side. Mod2 has a spacer, which I need in my bathroom because…

Web Shooter - Miles Morales