Creality Space Pi Dryer Cover for FDplast Coils
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Creality Space Pi dryer cover for FDplast rolls 78 x 202 mm
- Ocena
- 0 / 5
- Polubienia
- 25
- Pobrania
- 50
- Wydruki
- 1
- Wyświetlenia
- 902
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Creality Space Pi dryer cover for FDplast rolls. FDplast coil: diameter - 202 mm, center thickness - 78 mm, edge thickness - 81 mm. It rotates freely in the supports.
A 2 mm acrylic sheet is cut out according to the template. The edges are treated with sandpaper to remove shavings, create a chamfer, and are inserted into the walls. The glue is applied using a syringe filled with methylene chloride glue. After that, both halves are connected. The hinge is glued after installation on the dryer. There is a height margin. The diameter of the rolls can be 4-6 mm larger.
Working with glue is dangerous! Glue is a toxic substance with carcinogenic properties. Use protective equipment: goggles, rubber gloves. The room should be ventilated.
FDplast Coil Racks in Creality Space Pi: https://www.printables.com/model/1411480-fdplast-coil-racks-in-creality-space-pi
Heat Shield Creality Space Pi: https://www.printables.com/model/1402922-heat-shield-creality-space-pi
FusRock ABS-GF plastic reel, 10% fiberglass. attachment 0.6. layer 0.2.
Possible alternative solution: https://www.printables.com/model/1180159-junk-tecs-fdplast-mod-for-creality-space-pi-filame