1 / 5
Creality Space Pi Dryer Cover for FDplast Coils — image 1
1 / 5

Creality Space Pi Dryer Cover for FDplast Coils

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Creality Space Pi dryer cover for FDplast rolls 78 x 202 mm

Rating
0 / 5
Likes
25
Downloads
50
Makes
1
Views
898
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial — Share Alike

Creality Space Pi dryer cover for FDplast rolls. FDplast coil: diameter - 202 mm, center thickness - 78 mm, edge thickness - 81 mm. It rotates freely in the supports.

A 2 mm acrylic sheet is cut out according to the template. The edges are treated with sandpaper to remove shavings, create a chamfer, and are inserted into the walls. The glue is applied using a syringe filled with methylene chloride glue. After that, both halves are connected. The hinge is glued after installation on the dryer. There is a height margin. The diameter of the rolls can be 4-6 mm larger. 

Working with glue is dangerous! Glue is a toxic substance with carcinogenic properties. Use protective equipment: goggles, rubber gloves. The room should be ventilated.

FDplast Coil Racks in Creality Space Pi: https://www.printables.com/model/1411480-fdplast-coil-racks-in-creality-space-pi

Heat Shield Creality Space Pi: https://www.printables.com/model/1402922-heat-shield-creality-space-pi

FusRock ABS-GF plastic reel, 10% fiberglass. attachment 0.6. layer 0.2.

Possible alternative solution: https://www.printables.com/model/1180159-junk-tecs-fdplast-mod-for-creality-space-pi-filame