1 / 1
Stock Side Picatinny Rail for Breacher — zdjęcie 1

Stock Side Picatinny Rail for Breacher

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Replaces the BackPTcover part for Breacher with one that has a fitting Picatinny rail. Versions for both sides!

Ocena
5 / 5
Polubienia
10
Pobrania
95
Wydruki
1
Wyświetlenia
339
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Outdoor Toys
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

A stock side Picatinny rail for the Breacher, intended for attaching Silly Shell-related attachments (though nothing's stopping you from putting other things in there). It splices the geometry found on the optional BarrelFront with Picatinny rail, so it fits the other rails of the blaster.

Versions

  • The one piece version has the rail and the BackPTcover piece combined.
  • The holed version uses 2x m3 socket head screws (10-12mm long) to attach the rails, in case you want to remove the rails later on.

Printing

This replaces the BackPTcover piece, and should be printed with the same settings recommended by SillyButts (10% infill, 5 walls) in the same orientation, no supports. For the holed version you might want to use 20% infill for the rail, since that's what Silly uses for the top Picatinny rail.

IMPORTANT NOTE: The Picatinny rail on the left side is short of the official Picatinny spec by about 0.9mm (the spec requires 9.4mm of clearance), thanks to the little curve found on the part:

While unlikely, it is still possible for your attachment not to correctly mount to it. 

Better pics once my hardware kit arrives. Send any feedback my way!

Tagi