1 / 1
Stock Side Picatinny Rail for Breacher — image 1

Stock Side Picatinny Rail for Breacher

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Replaces the BackPTcover part for Breacher with one that has a fitting Picatinny rail. Versions for both sides!

Rating
5 / 5
Likes
10
Downloads
95
Makes
1
Views
339
Reviews
1

Updated at source:

Model information

Category
Outdoor Toys
License
Creative Commons — Attribution — Noncommercial — Share Alike

A stock side Picatinny rail for the Breacher, intended for attaching Silly Shell-related attachments (though nothing's stopping you from putting other things in there). It splices the geometry found on the optional BarrelFront with Picatinny rail, so it fits the other rails of the blaster.

Versions

  • The one piece version has the rail and the BackPTcover piece combined.
  • The holed version uses 2x m3 socket head screws (10-12mm long) to attach the rails, in case you want to remove the rails later on.

Printing

This replaces the BackPTcover piece, and should be printed with the same settings recommended by SillyButts (10% infill, 5 walls) in the same orientation, no supports. For the holed version you might want to use 20% infill for the rail, since that's what Silly uses for the top Picatinny rail.

IMPORTANT NOTE: The Picatinny rail on the left side is short of the official Picatinny spec by about 0.9mm (the spec requires 9.4mm of clearance), thanks to the little curve found on the part:

While unlikely, it is still possible for your attachment not to correctly mount to it. 

Better pics once my hardware kit arrives. Send any feedback my way!

Tags