iFixit Manta 1/4" Pegboard Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Orientacyjna cena wydruku pliku
5,32 € – 6,50 € netto (bez VAT)
Dla pliku: ifixit_manta_pegboard_mount_0.4n_0.25mm_PLA_COREONE_3h30m.bgcode
To wstępna wycena jednego pliku. Dokładną cenę poznasz przed zamówieniem.
Plik i założenia wyceny
Plik użyty do wyceny
Średnia wycena orientacyjna: 5,91 € netto (środek widełek).
- Masa podana przez autora
- 124 g
- Czas druku podany przez autora
- 3,51 godz.
- Materiał u źródła
- PLA
- Materiał wyceny
- PLA
- Drukarka wyceny
- Bambu Lab P1S - 0.4 nozzle
- Proces wyceny
- 0.20mm Standard
Orientacyjna wycena wyłącznie wybranego pliku, oparta na masie i czasie druku podanych przez autora. Warianty plików nie są sumowane. Ostateczna cena zostanie obliczona po analizie pliku.
Zapisane na tym urządzeniu.
Storage for the Manta iFixit Toolkit on a 1/4" Pegboard Mount
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 11
- Wydruki
- 0
- Wyświetlenia
- 66
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
I wanted a slightly more space efficient tool storage solution for the iFixit Manta toolkit which is why it is oriented sideways. I also included a more standard orientation. I use off the shelf expanding pegs for ¼" pegboard as I've found them to be more reliable and consistent compared to 3D printed pegs.
Required Hardware
QTY 2 expanding pegs are required for the current design but it can be remixed to add more mounting holes if required. The counter bores on the bottom side of the mount are intended to let the expanding pegs pull partially away from the pegboard forcing pegs to lock in place, leading to a snug fit.
Misc
I've included universal files and the base Solidworks file to enable easier remixing.