1° Base Riser for V2 Beverage Can Dispenser - Five 12 oz. Standard Cans
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Raises the dispenser up and increases the tilt by 1°
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 23
- Wydruki
- 0
- Wyświetlenia
- 238
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial
Adds a 1° tilt and raises the dispenser by about 4mm. Also works with the original pre-V2 dispenser.
My fridge is annoying in many ways, including: it's too shallow for 6 cans, the shelves have a 3-4mm lip around them, and the shelves are apparently tilted slightly back. The original 5-can model solved the problem of the fridge not having the depth for 6 cans. This base solves the other two problems. While the provided model fits the whole of the dispenser, I cut off the front and back when printing it so that it fit in between the front and back lips of the shelf. The added 1° tilt makes the cans consistently roll to the front.