1° Base Riser for V2 Beverage Can Dispenser - Five 12 oz. Standard Cans
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Raises the dispenser up and increases the tilt by 1°
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 23
- Makes
- 0
- Views
- 238
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution — Noncommercial
Adds a 1° tilt and raises the dispenser by about 4mm. Also works with the original pre-V2 dispenser.
My fridge is annoying in many ways, including: it's too shallow for 6 cans, the shelves have a 3-4mm lip around them, and the shelves are apparently tilted slightly back. The original 5-can model solved the problem of the fridge not having the depth for 6 cans. This base solves the other two problems. While the provided model fits the whole of the dispenser, I cut off the front and back when printing it so that it fit in between the front and back lips of the shelf. The added 1° tilt makes the cans consistently roll to the front.